ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Journal of Long-Term Effects of Medical Implants
SJR: 0.332 SNIP: 0.491 CiteScore™: 0.89

ISSN 印刷: 1050-6934
ISSN オンライン: 1940-4379

Journal of Long-Term Effects of Medical Implants

DOI: 10.1615/JLongTermEffMedImplants.v20.i1.40
pages 27-34

Technique to Quantify Subsurface Cracks in Retrieved Polyethylene Components Using Micro-CT

Matthew G Teeter
Division of Orthopaedic Surgery, London Health Sciences Centre, London, Ontario, N6A 5A5, Canada
Xunhua Yuan
Imaging Research Laboratories, Robarts Research Institute; Department of Medical Biophysics, The University of Western Ontario
Douglas D. R. Naudie
Division of Orthopaedic Surgery, The University of Western Ontario, London, ON
David W. Holdsworth
Imaging Research Laboratories, Robarts Research Institute; Department of Medical Biophysics; Division of Orthopaedic Surgery, The University of Western Ontario

要約

No current method to study delamination and subsurface cracking in polyethylene joint replacement components provides accurate, nondestructive, and quantitative measurements. A technique to study damage both at and below the surface could be of great benefit. We report the development of a micro-CT technique to nondestructively examine and quantify subsurface cracking in retrieved polyethylene tibial inserts. Five severely delaminated inserts and two never-implanted inserts were obtained from our institution's implant retrieval library and scanned with micro-CT. The insert subsurface was examined for cracks, and their location and widths were measured using a digital line tool. Subsurface cracks were readily apparent only in the images of the delaminated inserts. Cracks ran horizontally, just below the articular and back-side surfaces, and vertically at the center and lateral edges of the inserts and at the tibial post. Cracks ranged from 0.12 to 6.01 mm below the surface, with widths of 0.06-0.97 mm. Micro-CT can nondestructively visualize and quantify subsurface cracks. This is an enhancement to its previously reported use to quantify surface deviations from wear. Micro-CT is well suited for longitudinal pin-on-disk and wear simulator trials, in addition to studies of retrieved components.


Articles with similar content:

Measurements of Surface and Subsurface Damage in Retrieved Polyethylene Tibial Inserts of a Contemporary Design
Journal of Long-Term Effects of Medical Implants, Vol.22, 2012, issue 1
Jan-M. Brandt, David W. Holdsworth, Matthew G Teeter, Eric R. Bohm, Douglas D. R. Naudie, Richard W. McCalden
PART 1. REPORT FROM THE FOOD AND DRUG ADMINISTRATION
Infections Related to Breast Implants Reported to the Food and Drug Administration, 1977-1997

Journal of Long-Term Effects of Medical Implants, Vol.11, 2001, issue 1&2
S. Lori Brown, Christine M. Parmentier, Brockton Hefflin, Eileen K. Woo
Regional Measurements of Surface Deviation Volume in Worn Polyethylene Joint Replacement Components
Journal of Long-Term Effects of Medical Implants, Vol.20, 2010, issue 1
Daniel Lorusso, David W. Holdsworth, Jennifer L. Au, Jaques S. Milner, Matthew G Teeter, Douglas D. R. Naudie
Scanning Electron Microscope Fractography of Induced Fatigue-Damaged Saline Breast Implants
Journal of Long-Term Effects of Medical Implants, Vol.16, 2006, issue 1
Kenneth L. Jerina, T. L. Savoy, Clarence J. Wolf, Harold J. Brandon
A Review of Nondestructive Test Methods and Their Application to Measure the Stability and Osseointegration of Bone Anchored Endosseous Implants
Critical Reviews™ in Biomedical Engineering, Vol.26, 1998, issue 4
Neil Meredith