ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Composites: Mechanics, Computations, Applications: An International Journal
ESCI SJR: 0.354 SNIP: 0.655 CiteScore™: 1.2

ISSN 印刷: 2152-2057
ISSN オンライン: 2152-2073

Composites: Mechanics, Computations, Applications: An International Journal

DOI: 10.1615/CompMechComputApplIntJ.v3.i3.30
pages 227-252

SHEAR STRENGTH COMPUTATION OF REINFORCED CONCRETE BEAMS STRENGTHENED WITH COMPOSITE MATERIALS

Paolo Foraboschi
University IUAV di Venezia, ex Convento delle Terese, Dorsoduro 2206; 30123 − Venice, Italy

要約

Remodeling buildings often implies a modification of the mechanical behavior of the structural system, which may include the application of concentrated loads to beams that before have only been subjected to distributed loads. In the case of reinforced concrete beams, the new condition causes the beam to support a concentrated load in the cracked condition determined by the distributed loads that had been acting in the past. If the concentrated load is applied at or near the midspan of the beam, consequently, the shear demand reaches its maximum where the shear capacity is low. At and near the midspan, in fact, the cracks in the tension zone are vertical, as the stirrups are. Therefore, the truss mechanism provides the shear capacity with a nil contribution, since both the struts and ties are vertical. Fiber-reinforced polymer composites allow these beams to increase their shear strength, up to guaranteeing adequate safety.
This paper presents a method for analyzing the mechanical behavior of beams with vertical cracks, strengthened with FRP reinforcement, subjected to concentrated loads. The method defines the direction of the fibers that the reinforcement has to be composed of and computes the shear strength of the beam.


Articles with similar content:

Blast Analysis of Enclosure Masonry Walls Using Homogenization Approaches
International Journal for Multiscale Computational Engineering, Vol.7, 2009, issue 2
Gabriele Milani, Paulo B. Lourenco
SIMPLIFIED BUCKLING ANALYSIS OF STIFFENED LAMINATED SANDWICH PLATES
Composites: Mechanics, Computations, Applications: An International Journal, Vol.10, 2019, issue 1
Husam Al Qablan, Hazim M. Dwairi, Samer Rabab'ah, Omar Al Hattamleh
A COMPARATIVE STUDY OF LARGE DEFLECTIONS OF COMPOSITE BEAMS UNDER THERMOMECHANICAL LOADING
Composites: Mechanics, Computations, Applications: An International Journal, Vol.10, 2019, issue 4
Naser S. Al-Huniti
Calibration of Nanocrystal Grain Boundary Model Based on Polycrystal Plasticity Using Molecular Dynamics Simulations
International Journal for Multiscale Computational Engineering, Vol.8, 2010, issue 5
Sangmin Lee, Veera Sundararaghavan
3D FINITE ELEMENT ANALYSIS OF DEFICIENT HOLLOW STEEL BEAMS STRENGTHENED USING CFRP COMPOSITE UNDER TORSIONAL LOAD
Composites: Mechanics, Computations, Applications: An International Journal, Vol.8, 2017, issue 4
Amir Hamzeh Keykha