ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Heat Transfer Research
インパクトファクター: 1.199 5年インパクトファクター: 1.155 SJR: 0.267 SNIP: 0.503 CiteScore™: 1.4

ISSN 印刷: 1064-2285
ISSN オンライン: 2162-6561

巻:
巻 51, 2020 巻 50, 2019 巻 49, 2018 巻 48, 2017 巻 47, 2016 巻 46, 2015 巻 45, 2014 巻 44, 2013 巻 43, 2012 巻 42, 2011 巻 41, 2010 巻 40, 2009 巻 39, 2008 巻 38, 2007 巻 37, 2006 巻 36, 2005 巻 35, 2004 巻 34, 2003 巻 33, 2002 巻 32, 2001 巻 31, 2000 巻 30, 1999 巻 29, 1998 巻 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2019029634
pages 537-550

OPTIMIZATION OF THE EFFECTIVE PARAMETERS ON GROUND-SOURCE HEAT PUMPS FOR SPACE COOLING APPLICATIONS USING THE TAGUCHI METHOD

Mustafa Bahadir Özdemir
Gazi University, Technology Faculty, Energy Systems Engineering Department, Teknikokullar, Ankara, Turkey
Adem Acir
Gazi University, Technology Faculty, Energy Systems Engineering Department, Teknikokullar, Ankara, Turkey

要約

In this study, the effect of the process parameters and levels of the coefficient of performance (COPWS) of a ground-source heat pump (GSHP) system with a double U-tube heat exchanger is studied. The experiments were performed under various space air inlet/outlet temperatures and soil inlet/outlet temperatures in the GSHP system. The optimization of the process parameters in the GSHP system was carried out by the Taguchi method. In this study, the process parameters were considered as air inlet/outlet temperatures and soil inlet/outlet temperatures. The experimental design was evaluated as an L16 orthogonal array. To evaluate experimental results, the most significant process parameter, COPWS, was determined by using analysis of variance (ANOVA) and signal/noise (S/N) ratio. The optimum parameters and levels of COPWS for GSHP were obtained as A1B4C1D3 by the Taguchi method. The optimum levels were computed as Ti,sa at Level 1 (7.5°C), To,sa at Level 2 (21°C), Ti,wa at Level 2 (25.5°C), and To,wa at Level 1 (24°C). As a result, the most significant factor of COPWS in the GSHP system was obtained as the space air inlet temperature, which is the most significant parameter with 66.50 percent contribution ratio.

参考

  1. Acir, A., Canli, M.E., Ata, I., and Qakiroglu R., Parametric Optimization of Energy and Exergy Analyses of a Novel Solar Air Heater with Grey Relational Analysis, Appl. Therm. Eng., vol. 122, pp. 330-338, 2017.

  2. Baysal, E., Bilginsoy, A.K., and Acir, A., Parametric Optimization on Exergy Analysis of a Thermal Power Plant Using Taguchi Method, Energy Ed. Sci. Technol. Part A-Energy Sci. Res., vol. 29, no. 2, pp. 1313-1326, 2012.

  3. Bejan, A., Advanced Engineering Thermodynamics, Hoboken, N.J.: John Wiley & Sons Inc., 1988.

  4. Qakiroglu, R. and Acir, A., Optimization of Cutting Parameters on Drill Bit Temperature in Drilling by Taguchi Method, Measurement, vol. 46, no. 9, pp. 3525-3531, 2013a.

  5. Qakiroglu, R. and Acir, A., Taguchi Optimization Method of Tool Chip Interface Temperature Depending on the Cutting Parameters in Drilling Operations, Makine Teknolojileri Elektronik Dergisi, vol. 10, no. 2, pp. 73-86, 2013b.

  6. Qengel, A.Y. and Boles, M.A., Thermodynamics: An Engineering Approach, 6th Ed., New York: McGraw Hill, Inc., 2008.

  7. Esen, H. and Turgut, E., Optimization of Operating Parameters of a Ground Coupled Heat Pump System by Taguchi Method, Energy Build., vol. 107, pp. 329-334, 2015.

  8. Holman, J.P., Experimental Methods for Engineers, 6th Ed., Singapore: McGraw-Hill, 1994.

  9. Hu, P., Hu, Q., Lin, Y., Yang, W., and Xing, L., Energy and Exergy Analysis of a Ground Source Heat Pump System for a Public Building in Wuhan, China under Different Control Strategies, Energy Build., vol. 152, pp. 301-312, 2017.

  10. Kline, S.J. and McClintock, F.A., Describing Uncertainties in Single Sample Experiments, Mech. Eng., vol. 75, pp. 3-8, 1953.

  11. Ochsner, K., Geothermal Heat Pumps: A Guide for Planning and Installing, 1st Ed., London: Earthscan Publications Ltd., 2007.

  12. Omer, A.M., Ground-Source Heat Pumps Systems and Applications, Renew. Sustain. Energy Rev., vol. 12, pp. 344-371, 2008.

  13. Ozdemir, M.B. and Ozkaya, M.G., Energy and Exergy Analyses of the Vertical Type Ground-Sourced Heat Pump for Ankara Conditions, Gazi Univ. J. Polytech., vol. 18, no. 4, pp. 269-280, 2015.

  14. Ozdemir, M.B., Optimization of Process Parameters of Ground Source Heat Pumps for Space Heating Applications with Taguchi Method, Gazi Univ. J. Polytech., vol. 21, no. 4, pp. 991-998, 2018.

  15. Pandey, N., Murugesan, K., and Thomas, H.R., Optimization of Ground Heat Exchangers for Space Heating and Cooling Applications Using Taguchi Method and Utility Concept, Appl. Energy, vol. 190, pp. 421-438, 2017.

  16. Ramniwas, K., Murugesan, K., and Sahoo, P.K., Optimization of Operating Parameters of Ground Source Heat Pump Using Taguchi Method, in 23rd IIR Conf., Prague, Czech Republic, August 21-26, 2011.

  17. Ross, P. J., Taguchi Techniques for Quality Engineering, 2nd Ed., New York: McGraw-Hill, 1996.

  18. Sarbu, I. and Sebarchievici, C., Ground Source Heat Pumps, Fundamentals, Experiments, and Applications, 1st Ed., Cambridge, MA: Academic Press, 2015.

  19. Sivasakthivel, T., Murugesan, K., and Sahoo, P.K., Optimization of Ground Heat Exchanger Parameters of Ground Source Heat Pump System for Space Heating Applications, Energy, vol. 78, pp. 573-586, 2014a.

  20. Sivasakthivel, T., Murugesan, K., and Thomas, H.R., Optimization of Operating Parameters of Ground Source Heat Pump System for Space Heating and Cooling by Taguchi Method and Utility Concept, Appl. Energy, vol. 116, pp. 76-85, 2014b.

  21. Sivasakthivel, T., Philippe, M., Murugesan, K., Verma, V., and Hu, P., Experimental Thermal Performance Analysis of Ground Heat Exchangers for Space Heating and Cooling Applications, Renew. Energy, vol. 113, pp. 1168-1181, 2017.

  22. Sozen, A., Qiftfi, E., Kejel, S., Guru, M., Variyenli, H.I., and Karakaya, U., Usage of Diatomite-Containing Nanofluid as the Working Fluid in a Wickless Loop Heat Pipe: Experimental and Numerical Study, Heat Transf. Res., vol. 49, no. 17, pp. 1721-1744, 2018a.

  23. Sozen, A., Guru, M., Menlik, T., Karakaya, U., and Qiftfi, E., Experimental Comparison of Triton X-100 and Sodium Dodecyl Benzene Sulfonate Surfactants on Thermal Performance of TiO2-Deionized Water Nanofluid in a Thermosiphon, Exp. Heat Transf., vol. 31, no. 5, pp. 450-469, 2018b.

  24. Sozen, A., Khanlari, A., and Qiftfi, E., Experimental and Numerical Investigation of Nanofluid Usage in a Plate Heat Exchanger for Performance Improvement, Int. J. Renew. Energy Develop., vol. 8, no. 1, pp. 27-32, 2019a.

  25. Sozen, A., Khanlari, A., and Qiftfi, E., Heat Transfer Enhancement of Plate Heat Exchanger Utilizing Kaolin-Including Working Fluid, Proc. Inst. Mech. Eng. Part A: J. Power Energy, 2019b (in press). DOI: 10.1177/0957650919832445.

  26. Sozen, A., Ozturk, A., Ozalp, M., and Qiftfi, E., Influences of Alumina and Fly Ash Nanofluid Usage on the Performance of Recuperator Including Heat Pipe Bundle, Int. J. Environ. Sci. Technol., 2018c (in press). DOI: 10.1007/s13762-018-1832-6.

  27. Sozen, A., Variyenli, H.I., Ozdemir, M.B., and Guru, M., Upgrading the Thermal Performance of Parallel and Cross-Flow Concentric Tube Heat Exchangers Using MgO Nanofluid, Heat Transf. Res., vol. 48, no. 5, pp. 419-434, 2017.

  28. Taguchi, G., ElSayed, E.A., and Hsiang, T.C., Quality Engineering in Production Systems, New York: McGraw-Hill, 1989.

  29. Verma, V. and Murugesan, K., Experimental Study of Solar Assisted Ground Source Heat Pump System during Space Heating Operation from Morning to Evening, J. Mech. Sci. Technol., vol. 32, no. 1, pp. 391-398, 2018.

  30. Verma, V. and Murugesan, K., Optimization of Solar Assisted Ground Source Heat Pump System for Space Heating Application by Taguchi Method and Utility Concept, Energy Build., vol. 82, pp. 296-309, 2014.

  31. Xia, L., Ma, Z., McLauchlan, C., and Wang, S., Experimental Investigation and Control Optimization of a Ground Source Heat Pump System, Appl. Therm. Eng., vol. 127, pp. 70-80, 2017.

  32. Yang, W.H. and Tarng, Y.S., Design Optimization of Cutting Parameters for Turning Operations Based on the Taguchi Method, J. Mater. Process. Technol., vol. 84, pp. 122-129, 1998.

  33. Zhang, J.Z., Chen, J.C., and Kirbyet, E.D., Surface Roughness Optimization in an End-Milling Operation Using the Taguchi Design Method, J. Mater. Process. Technol., vol. 184, pp. 233-239, 2007.


Articles with similar content:

AN IMPROVEMENT ON THE CRYOGENIC AIR SEPARATION SYSTEM OF A CO2 RECOVERY POWER PLANT WITH O2/CO2 COMBUSTION
International Journal of Energy for a Clean Environment, Vol.6, 2005, issue 3
Shigenao Maruyama, Seigo Sakai, T. Kakio
THERMODYNAMIC OPTIMIZATION OF COUPLED HEAT WORK CONVERSION AND HEAT TRANSFER ENERGY SYSTEMS BY APPLYING INVERSE PROBLEM AND VARIATION METHOD
Heat Transfer Research, Vol.48, 2017, issue 18
Xin Wang, Yinping Zhang, Yin Zhang
THERMODYNAMIC MODELING OF THERMOELECTRIC GENERATOR SYSTEMS
Heat Pipe Science and Technology, An International Journal, Vol.6, 2015, issue 3-4
S. C. Kaushik, Manikandan Sundararaj, Ranjana Hans
PERFORMANCE EVALUATION OF THE TWO-FLUID CYCLE IN MUNICIPAL SOLID WASTE-BURNT POWER GENERATION
Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV, Vol.0, 2000, issue
Katsumi Sugimto, Hitoshi Asano, Tomoya Yamashita, Nobutaka Tsuchimoto, Terushige Fujii
THERMODYNAMIC ANALYSIS AND COMPARISON OF SINGLE EFFECT WATER−LITHIUM BROMIDE ABSORPTION HEAT TRANSFORMER UNDER THE HIGH- AND LOW-TEMPERATURE CONDITIONS
Heat Transfer Research, Vol.46, 2015, issue 4
Zhaolong Hao, Zhong Lan, Xuehu Ma