ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Heat Transfer Research
インパクトファクター: 0.404 5年インパクトファクター: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN 印刷: 1064-2285
ISSN オンライン: 2162-6561

巻:
巻 51, 2020 巻 50, 2019 巻 49, 2018 巻 48, 2017 巻 47, 2016 巻 46, 2015 巻 45, 2014 巻 44, 2013 巻 43, 2012 巻 42, 2011 巻 41, 2010 巻 40, 2009 巻 39, 2008 巻 38, 2007 巻 37, 2006 巻 36, 2005 巻 35, 2004 巻 34, 2003 巻 33, 2002 巻 32, 2001 巻 31, 2000 巻 30, 1999 巻 29, 1998 巻 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.v37.i4.50
pages 349-363

Estimation of the Thermohydraulic Efficiency of Heat Exchanging Apparatuses with Twisted Tubes

Boris V. Dzyubenko
Moscow Aviation Institute (State Technical University), 4 Volokolamskoe Highway, Moscow, 125993, Russia

要約

The paper presents generalizing relations to calculate heat transfer and hydraulic resistance in longitudinal flow of heat-transfer agents in the cavities of a heat exchanger with twisted tubes and the results of comparison of the thermohydraulic efficiency of the heat-transfer surfaces of the twisted tubes with the surfaces of smooth tubes and tubes having other heat-transfer intensifiers. It has been found that in the flow transition region Reynolds-related regimes with an advanced increase in the heat-transfer coefficient in comparison with the increase in the coefficient of hydraulic resistance is implemented. In a longitudinal flow past twisted tubes, a 1.5−3.5-fold increase in the heat-transfer coefficient is ensured, as compared to flow in smooth straight tubes. The estimation of the thermohydraulic efficiency of heat exchangers made by the method of effective parameters and the analysis of the efficiency of various heat-transfer surfaces made it possible to find the flow regions where the heat-exchange apparatuses with flow swirling by twisted tubes are advantageous over heat exchangers involving other methods of heat-transfer enhancement.


Articles with similar content:

CHOICE AND JUSTIFICATION OF THE HEAT TRANSFER INTENSIFICATION METHODS
Journal of Enhanced Heat Transfer, Vol.25, 2018, issue 6
Yury A. Kuzma-Kichta, Alexander I. Leontiev
HEAT TRANSFER AND PRESSURE DROP OF FINNED TUBE BANKS WITH STAGGERED ARRANGEMENT IN FORCED CONVECTION
International Heat Transfer Conference 10, Vol.25, 1994, issue
Masayuki Fukagawa, T. Motai , Makio Iwabuchi, M. Kanzaka, Tetsuya Matsuo
NUMERICAL SIMULATION OF CONVECTIVE HEAT TRANSFER AND PRESSURE DROP IN TWO TYPES OF LONGITUDINALLY AND INTERNALLY FINNED TUBES
Heat Transfer Research, Vol.46, 2015, issue 1
Feng Wu, Wenjing Zhou
ENHANCEMENT OF HEAT TRANSFER OF LAMINAR FLOW OF VISCOUS OIL THROUGH A CIRCULAR TUBE HAVING INTEGRAL AXIAL RIB ROUGHNESS AND FITTED WITH HELICAL SCREW-TAPE INSERTS
Heat Transfer Research, Vol.43, 2012, issue 3
Suvanjan Bhattacharyya, G. L. Dayanidhi, Sujoy Saha
EFFECT OF TUBE BANK INCLINATION ON THE THERMAL HYDRAULIC PERFORMANCE OF AIR COOLED HEAT EXCHANGERS
International Heat Transfer Conference 8, Vol.6, 1986, issue
Max Monheit , James Freim