ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Heat Transfer Research
インパクトファクター: 0.404 5年インパクトファクター: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN 印刷: 1064-2285
ISSN オンライン: 2162-6561

巻:
巻 51, 2020 巻 50, 2019 巻 49, 2018 巻 48, 2017 巻 47, 2016 巻 46, 2015 巻 45, 2014 巻 44, 2013 巻 43, 2012 巻 42, 2011 巻 41, 2010 巻 40, 2009 巻 39, 2008 巻 38, 2007 巻 37, 2006 巻 36, 2005 巻 35, 2004 巻 34, 2003 巻 33, 2002 巻 32, 2001 巻 31, 2000 巻 30, 1999 巻 29, 1998 巻 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2018024361
pages 1793-1811

EXPERIMENTAL INVESTIGATION OF THE THERMAL PERFORMANCE OF MESH WICK HEAT PIPE

Naveen Kumar Gupta
Department of Mechanical Engineering, Institute of Engineering and Technology, GLA University, Mathura, India
Arun Kumar Tiwari
Department of Mechanical Engineering, Institute of Engineering and Technology Lucknow, India
Subrata Kumar Ghosh
Department of Mechanical Engineering, Indian Institute of Technology (ISM), Dhanbad-826004, India

要約

In this article, the results obtained from a detailed experimental investigation of the thermal performance of mesh wick heat pipe are presented. The effects of heat input, inclination angle, and the volume of the working fluid on the thermal performance of the heat pipe were investigated. Experimental investigations were carried out over a wide range of heat input (50-150 W), different inclination angles (0°, 15°, 30°, 45°, and 60°), and volumes of the working fluid (20 mL, 25 mL, 30 mL, and 35 mL). The results show that the thermal performance of the heat pipe increases with increase in the heat input until the dryout condition is achieved. The heat pipe achieved the maximum thermal efficiency of 69% at 150 W heat input, 30° inclination angle, and charged with 35 mL of working fluid. The authors highlight the different causes responsible for the enhancement in the thermal performance of the heat pipe.


Articles with similar content:

THERMAL-HYDRAULIC CHARACTERIZATION OF A FLAT PLATE PULSATING HEAT PIPE FOR AUTOMOTIVE APPLICATIONS
Interfacial Phenomena and Heat Transfer, Vol.3, 2015, issue 4
Cyril Romestant, Yves Bertin, V. Manno, Vincent Ayel, Sauro Filippeschi, Mauro Mameli
EFFECTS OF ORIENTATION AND CUO/WATER NANOFLUID ON THE PERFORMANCE OF A TWO-PHASE CLOSED THERMOSYPHON
Heat Pipe Science and Technology, An International Journal, Vol.1, 2010, issue 4
N. Alagappan, A.R. Ramanathan
THERMAL PERFORMANCE OF RE-ENTRANT GROOVE HEAT PIPE: DEPENDENCE ON ORIENTATION AND TEMPERATURE
Heat Pipe Science and Technology, An International Journal, Vol.5, 2014, issue 1-4
Yasuko Shibano, Hiroyuki Ogawa
EXPERIMENTAL STUDY ON THERMAL PERFORMANCE OF PULSATING HEAT PIPE WITH Al2O3-DEIONIZEDWATER NANOFLUID AT DIFFERENT ORIENTATIONS
Journal of Enhanced Heat Transfer, Vol.20, 2013, issue 2
Bhawna Verma, K. K. Srivastava, V. L. Yadav
PARAMETRIC NUMERICAL INVESTIGATION OF HEAT TRANSFER FROM CONVECTORS TO IMPROVE EFFICIENCY OF PANEL RADIATORS
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2015, issue
Senol Baskaya, Sinan Yucedag, Tamer Calisir, Hakan Onur Yazar