ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Heat Transfer Research
インパクトファクター: 0.404 5年インパクトファクター: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN 印刷: 1064-2285
ISSN オンライン: 2162-6561

巻:
巻 50, 2019 巻 49, 2018 巻 48, 2017 巻 47, 2016 巻 46, 2015 巻 45, 2014 巻 44, 2013 巻 43, 2012 巻 42, 2011 巻 41, 2010 巻 40, 2009 巻 39, 2008 巻 38, 2007 巻 37, 2006 巻 36, 2005 巻 35, 2004 巻 34, 2003 巻 33, 2002 巻 32, 2001 巻 31, 2000 巻 30, 1999 巻 29, 1998 巻 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2018021728
pages 965-977

EXPERIMENTAL INVESTIGATION OF MIXED CONVECTION AND SURFACE RADIATION HEAT TRANSFER FROM PROTRUDING DISCRETE HEAT SOURCES MOUNTED ON A VERTICAL CHANNEL

Tapano Kumar Hotta
School of Mechanical Engineering, VIT University, Vellore 632014, India
Perni Sri Harsha
Department of Mechanical Engineering, IIT Madras, Chennai 600036, India
S. P. Venkateshan
Department of Mechanical Engineering, IIT Madras, Chennai 600036, India

要約

Three-dimensional steady-state mixed convection heat transfer experiments are conducted on five protruding discrete heat sources (aluminum) of different sizes arranged at various positions on a substrate board (bakelite), mounted on a vertical channel. The objective is to study the mixed convection and surface radiation heat transfer characteristics of these heat sources. It is seen that the temperature excess of the heat sources is largely influenced by their size, positioning on the substrate board, power generation rate, and channel aspect ratio. The aspect ratio studies are carried out to investigate the effect of the channel size on the cooling of discrete heat sources. It is seen that increasing the channel aspect ratio has a negligible effect on the heat transfer characteristic of heat sources, and a suitable aspect ratio has to be maintained to obtain the optimal temperature of heat sources. Experiments are carried out for both polished and black painted heat sources to study the contribution of surface radiation. The results suggest that radiation is significant as the heat transfer is enhanced by 10% from polished to black painted surfaces. Again, the larger heat source will have less heat dissipation rate per unit area and must be placed on the substrate bottom.


Articles with similar content:

SIMULATION STUDIES OF MULTIMODE HEAT TRANSFER FROM A DISCRETELY HEATED VERTICAL CHANNEL
Heat Transfer Research, Vol.46, 2015, issue 11
C. Gururaja Rao, Shrikant Londhe
BUOYANCY-DRIVEN CONVECTION OF A CONTAINED FLUID WITH UNSTEADY BOUNDARY CONDITIONS
ICHMT DIGITAL LIBRARY ONLINE, Vol.4, 2001, issue
Jae Min Hyun, Ho Sang Kwak
Analysis of natural convection flow and heat transfer in a non-uniform heated vertical open channel
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2012, issue
Christophe Menezo, Stephanie Giroux-Julien, E. Sanvicente, Hassan Bouia
THERMAL ANALYSIS OF RECTANGULAR FINS WITH DIFFERENT SHAPES OF LATERAL PERFORATIONS BY FORCED CONVECTION
Heat Transfer Research, Vol.49, 2018, issue 7
Kavita H. Dhanawade, Vivek K. Sunnapwar, Hanamant S. Dhanawade
Natural Convection in an Open-Ended Channel Under Staggered Thermal Boundary Conditions. Application to the Control of the Free Cooling in Photovoltaic Double-Skin Facades.
International Heat Transfer Conference 15, Vol.23, 2014, issue
Christophe Menezo, Stephanie Giroux-Julien, Marco Fossa, Victoria Timchenko