ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Heat Transfer Research
インパクトファクター: 0.404 5年インパクトファクター: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN 印刷: 1064-2285
ISSN オンライン: 2162-6561

巻:
巻 50, 2019 巻 49, 2018 巻 48, 2017 巻 47, 2016 巻 46, 2015 巻 45, 2014 巻 44, 2013 巻 43, 2012 巻 42, 2011 巻 41, 2010 巻 40, 2009 巻 39, 2008 巻 38, 2007 巻 37, 2006 巻 36, 2005 巻 35, 2004 巻 34, 2003 巻 33, 2002 巻 32, 2001 巻 31, 2000 巻 30, 1999 巻 29, 1998 巻 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2018026288
pages 435-450

COMPARISON BETWEEN HEAT TRANSFER CHARACTERISTICS OF TiO2/DEIONIZED WATER AND KAOLIN/DEIONIZED WATER NANOFLUIDS IN THE PLATE HEAT EXCHANGER

Ataollah KHANLARI
University of Turkish Aeronautical Association
Adnan Sözen
Gazi University, Technology Faculty, Energy Systems Engineering, 06500, Ankara, Turkey
Halil Ibrahim Variyenli
Gazi University, Technology Faculty, Energy Systems Engineering, 06500, Ankara, Turkey
Metin Gürü
Gazi University, Engineering Faculty, Chemical Engineering, 06500, Ankara, Turkey

要約

The plate heat exchangers, of high efficiency and small size, with corrugated thin plates are compact-type heat exchangers which were widely used in different sectors of industry. To enhance the heat transfer characteristics of plate heat exchangers, nanofluids can be utilized as working fluids. In this study, the effects of using TiO2/deionized water and kaolin/deionized water nanofluids as working fluids in the plate heat exchanger were experimentally analyzed. In order to illustrate the enhancement rate of heat transfer, the experiments were conducted by using deionized water, TiO2/deionized water, and kaolin/deionized water nanofluids. The experiments were done with varying temperature and fluid flow rate. Each nanofluid has 2% (wt./wt.) nanoparticle content. Also, Triton X-100 was added to the prepared mixture as 0.2% of a final concentration to improve the solubility of nanoparticles. The obtained results showed that a kaolin/deionized water nanofluid had higher thermal performance than TiO2/deionized water nanofluid. The maximum increment in the heat transfer rate using TiO2/deionized water and kaolin/deionized water was 12% and 18%, respectively.


Articles with similar content:

USAGE OF A DIATOMITE-CONTAINING NANOFLUID AS THE WORKING FLUID IN A WICKLESS LOOP HEAT PIPE: EXPERIMENTAL AND NUMERICAL STUDY
Heat Transfer Research, Vol.49, 2018, issue 17
Ugur Karakaya, Halil Ibrahim Variyenli, Metin Gürü, Erdem Çiftçi, Adnan Sözen, Selçuk Keçel
PERFORMANCE OF AN AUTOMOTIVE CAR RADIATOR OPERATED WITH NANOFLUID-BASED COOLANT
Heat Transfer Research, Vol.49, 2018, issue 16
Pijakala Dinesha, Shiva Kumar, Ashutosh Gaggad, Kshitij Mehrotra
FREE CONVECTION HEAT TRANSFER IN HORIZONTAL AND VERTICAL RECTANGULAR CAVITIES FILLED WITH NANOFLUIDS
International Heat Transfer Conference 13, Vol.0, 2006, issue
Christopher Yap, Arun S. Mujumdar, X. Q. Wang
NUMERICAL INVESTIGATION OF TRIPLE CONCENTRIC−TUBE HEAT EXCHANGER USING Al2O3-WATER NANOFLUIDS
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Tarikayehu Amanuel, Manish Mishra
EXPERIMENTAL STUDY ON HEAT TRANSFER PERFORMANCE OF AL2O3-WATER NANOFLUID IN SPRAY COOLING SYSTEM
First Thermal and Fluids Engineering Summer Conference, Vol.8, 2015, issue
Changqing Tian, Shuangquan Shao, Chunchao Qian, Hongbo Xu