ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Heat Transfer Research
インパクトファクター: 0.404 5年インパクトファクター: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN 印刷: 1064-2285
ISSN オンライン: 2162-6561

巻:
巻 51, 2020 巻 50, 2019 巻 49, 2018 巻 48, 2017 巻 47, 2016 巻 46, 2015 巻 45, 2014 巻 44, 2013 巻 43, 2012 巻 42, 2011 巻 41, 2010 巻 40, 2009 巻 39, 2008 巻 38, 2007 巻 37, 2006 巻 36, 2005 巻 35, 2004 巻 34, 2003 巻 33, 2002 巻 32, 2001 巻 31, 2000 巻 30, 1999 巻 29, 1998 巻 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2016008224
pages 575-595

NUMERICAL INVESTIGATION OF COMBINED PARALLEL TWO SHELL-PASS SHELL-AND-TUBE HEAT EXCHANGERS WITH CONTINUOUS HELICAL BAFFLES

Jian-Feng Yang
Key Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710049, China
Qiu-Wang Wang
Key Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, P.R. China
Min Zeng
Key Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710049, China

要約

A combined parallel two shell-pass shell-and-tube heat exchanger with continuous helical baffles (CPTP-STHX) and an improved model (CPTP-STHX-improved) have been proposed to improve the heat transfer performance of shell-and-tube heat exchangers (STHXs). It is found that proportion of the mass flow rate of the inner shell pass to the total mass flow rate of the shell side is a constant. The heat transfer performance increases with the resistance of the inner shell pass. The CPTP-STHX-improved is compared with a conventional STHX with segmental baffles (SG-STHXs) by means of the computational fluid dynamic (CFD) method. The numerical results show that for the same mass flow rate m in the shell side, the heat transfer coefficient h, the overall pressure drop Δp, and the heat transfer coefficient per pressure drop h/Δp of the CPTP-STHX-improved are 41.1%, 34.5%, and 4.9% higher than those of the SG-STHX, respectively. For the same overall pressure drop in the shell side, the heat transfer coefficient of the CPTP-STHX-improved has 23.1% increases than that of the SG-STHX. Based on these results, it can be concluded that the CPTP-STHX-improved might be used to replace the conventional STHX with segmental baffles in industrial applications.