年間 12 号発行
ISSN 印刷: 1091-028X
ISSN オンライン: 1934-0508
Indexed in
Dependence of Elastic Properties of Materials on Their Porosity: Review of Models
要約
The paper presents a review of models relating elastic moduli of porous materials with porosity. Dry isotropic porous materials with a homogeneous and continuous solid matrix are considered, excluding granular and fractured materials. The models are grouped into six classes, taking into account methodological differences adopted for their derivation. Quantitative predictions for most of the models are compared within specified groups and then a few representatives of the groups of models are analyzed for two different ranges of porosity. A short discussion of their applicability and limitations is included.
-
Ilavsky J., Characterization of Complex Thermal Barrier Deposits Pore Microstructures by a Combination of Imaging, Scattering, and Intrusion Techniques, Journal of Thermal Spray Technology, 19, 1-2, 2010. Crossref
-
Fiedler T., Kim H. S., Belova I. V., Sloan S. W., Murch G. E., Öchsner A., Elastic finite element analysis on cross-sections of random hollow sphere structures. Elastische Finite-Elemente-Analyse von Querschnitten zufällig angeordneter Hohlkugelstrukturen, Materialwissenschaft und Werkstofftechnik, 41, 5, 2010. Crossref
-
Hernández-Olivares F., Mayor-Lobo P., Experimental assessment of commercial one-coat renders for buildings façades, Construction and Building Materials, 25, 1, 2011. Crossref
-
Goueygou Marc, Lafhaj Zoubeir, Soltani Fethi, Assessment of porosity of mortar using ultrasonic Rayleigh waves, NDT & E International, 42, 5, 2009. Crossref
-
Hamdi Essaieb, Lafhaj Zoubeir, Microcracking based rock classification using ultrasonic and porosity parameters and multivariate analysis methods, Engineering Geology, 167, 2013. Crossref
-
Maalej S., Lafhaj Z., Bouassida M., Micromechanical modelling of dry and saturated cement paste: Porosity assessment using ultrasonic waves, Mechanics Research Communications, 51, 2013. Crossref
-
Zhang Chao, Wang Wenzhi, Virtual Testing of Three-Dimensional Hollow/Porous Braided Composites, in Porous lightweight composites reinforced with fibrous structures, 2017. Crossref
-
Bita H, Faiz B, Moudden A, Lotfi H, Ouacha El H, Ultrasonic nondestructive characterization of mortars by the width of the resonances, IOP Conference Series: Materials Science and Engineering, 186, 2017. Crossref
-
Davanas Kostas, Determination of creep cavity nucleation rates, Materials at High Temperatures, 37, 2, 2020. Crossref
-
Chen Ziguang, Niazi Sina, Bobaru Florin, A peridynamic model for brittle damage and fracture in porous materials, International Journal of Rock Mechanics and Mining Sciences, 122, 2019. Crossref
-
Canedo Marianny Silva, Figueiredo Maria Fernanda Santos, Thomik Maximilian, Vorhauer-Huget Nicole, Tsotsas Evangelos, Thoméo João Cláudio, Porosity and pore size distribution of beds composed by sugarcane bagasse and wheat bran for solid-state cultivation, Powder Technology, 386, 2021. Crossref
-
Ruiz Carlos Cezar de La Plata, Silveira Jose Luis, Limit analysis of porous materials, Archive of Applied Mechanics, 92, 7, 2022. Crossref