ライブラリ登録: Guest

EFFECT OF THE METALLIC FOAM HEAT SINK SHAPE ON THE MIXED CONVECTION JET IMPINGEMENT COOLING OF A HORIZONTAL SURFACE

巻 21, 発行 4, 2018, pp. 295-309
DOI: 10.1615/JPorMedia.v21.i4.10
Get accessGet access

要約

The effects of six different shapes of aluminum foam heat sinks attached to a horizontal heated surface are investigated numerically under the slot-jet impingement cooling. Various aluminum foam heat sink shapes are considered for easy manufacturing, such as rectangle, elliptic, trapezoidal, opposite trapezoidal, triangle, and opposite triangle. The jet inlet flow is in the vertical direction from the top, which leads to the opposing mixed convection mode condition. The air flow through the aluminum foam heat sinks is modeled using the porous media model. The results are presented for two different types of aluminum foams. The governing parameters are grouped into Reynolds number, Grashof number, and the metallic foam heat sink shape and properties (inertial resistance factor, permeability, and porosity). The results show that the cooling process enhancement can be achieved by attaching any one of the shapes and both types of the aluminum foam heat sinks considered. It is found that the most effective heat sink shape depends on the flow conditions (Re, Gr, and foam shape and properties). The results presented show the effects of the shape of the metal foam on the heat dissipation for different flow conditions. The results also show the superiority of the convex-shape heat sinks under the forced convection mode conditions. On the other hand, the results show that the concave-shape heat sinks are more effective than the convex ones under the mixed convection mode conditions.

によって引用された
  1. Trang Christ, Ahmed Rahman, Kaosar Mohammed Golam, Liquid water film on the outer surface of a half-submerged rotating drum, Journal of Plastic Film & Sheeting, 35, 3, 2019. Crossref

  2. Trang Christ, Ahmed Rahman, Kaosar Mohammed Golam, Effect of density ratio on the dispersion of particles in a submerged liquid jet, Computational Particle Mechanics, 6, 4, 2019. Crossref

  3. Zene Mahamat Tahir Abdramane Mahamat, Hasan Nurul, Ruizhong Jiang, Zhenliang Guan, Volumetric estimation and OOIP calculation of the Ronier4 block of Ronier oilfield in the Bongor basin, Chad, Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 5, 4, 2019. Crossref

  4. Abdullah Nurafiqah, Hasan Nurul, Saeid Nawaf, Mohyaldinn Mysara Eissa, Zahran El-Said Mamdouh Mahmoud, The study of the effect of fault transmissibility on the reservoir production using reservoir simulation—Cornea Field, Western Australia, Journal of Petroleum Exploration and Production Technology, 10, 2, 2020. Crossref

  5. Zene Mahamat Tahir Abdramane Mahamat, Hasan Nurul, Jiang Ruizhong, Zhenliang Guan, Abdullah Nurafiqah, Evaluation of reservoir performance by waterflooding: case based on Lanea oilfield, Chad, Journal of Petroleum Exploration and Production Technology, 11, 3, 2021. Crossref

  6. Abdullah Nurafiqah, Hasan Nurul, Effects of miscible CO2 injection on production recovery, Journal of Petroleum Exploration and Production Technology, 11, 9, 2021. Crossref

  7. Saeid Nawaf H., Thermal Stress Analysis of Jet Impingement Cooling of a Solid Block, Heat Transfer Engineering, 2022. Crossref

  8. Sambamurthy Vivek Subramaniam, Madhavan Srivatsan, Singh Prashant, Ekkad Srinath V., Array Jet Impingement on High Porosity Thin Metal Foams: Effect of Foam Height, Pore-Density, and Spent Air Crossflow Scheme on Flow Distribution and Heat Transfer, Journal of Heat Transfer, 142, 11, 2020. Crossref

  9. Al-Sumaily Gazy F., Dhahad Hayder A., Thompson Mark C., Mixed convection phenomenon in packed beds: A comprehensive review, Thermal Science and Engineering Progress, 32, 2022. Crossref

近刊の記事

Effects of Momentum Slip and Convective Boundary Condition on a Forced Convection in a Channel Filled with Bidisperse Porous Medium (BDPM) Vanengmawia PC, Surender Ontela ON THERMAL CONVECTION IN ROTATING CASSON NANOFLUID PERMEATED WITH SUSPENDED PARTICLES IN A DARCY-BRINKMAN POROUS MEDIUM Pushap Sharma, Deepak Bains, G. C. Rana Effect of Microstructures on Mass Transfer inside a Hierarchically-structured Porous Catalyst Masood Moghaddam, Abbas Abbassi, Jafar Ghazanfarian Insight into the impact of melting heat transfer and MHD on stagnation point flow of tangent hyperbolic fluid over a porous rotating disk Priya Bartwal, Himanshu Upreti, Alok Kumar Pandey Numerical Simulation of 3D Darcy-Forchheimer Hybrid Nanofluid Flow with Heat Source/Sink and Partial Slip Effect across a Spinning Disc Bilal Ali, Sidra Jubair, Md Irfanul Haque Siddiqui Fractal model of solid-liquid two-phase thermal transport characteristics in the rough fracture network shanshan yang, Qiong Sheng, Mingqing Zou, Mengying Wang, Ruike Cui, Shuaiyin Chen, Qian Zheng Application of Artificial Neural Network for Modeling of Motile Microorganism-Enhanced MHD Tangent Hyperbolic Nanofluid across a vertical Slender Stretching Surface Bilal Ali, Shengjun Liu, Hongjuan Liu Estimating the Spreading Rates of Hazardous Materials on Unmodified Cellulose Filter Paper: Implications on Risk Assessment of Transporting Hazardous Materials Heshani Manaweera Wickramage, Pan Lu, Peter Oduor, Jianbang Du ELASTIC INTERACTIONS BETWEEN EQUILIBRIUM PORES/HOLES IN POROUS MEDIA UNDER REMOTE STRESS Kostas Davanas Gravity modulation and its impact on weakly nonlinear bio-thermal convection in a porous layer under rotation: a Ginzburg-Landau model approach Michael Kopp, Vladimir Yanovsky Pore structure and permeability behavior of porous media under in-situ stress and pore pressure: Discrete element method simulation on digital core Jun Yao, Chunqi Wang, Xiaoyu Wang, Zhaoqin Huang, Fugui Liu, Quan Xu, Yongfei Yang Influence of Lorentz forces on forced convection of Nanofluid in a porous lid driven enclosure Yi Man, Mostafa Barzegar Gerdroodbary SUTTERBY NANOFLUID FLOW WITH MICROORGANISMS AROUND A CURVED EXPANDING SURFACE THROUGH A POROUS MEDIUM: THERMAL DIFFUSION AND DIFFUSION THERMO IMPACTS galal Moatimid, Mona Mohamed, Khaled Elagamy CHARACTERISTICS OF FLOW REGIMES IN SPIRAL PACKED BEDS WITH SPHERES Mustafa Yasin Gökaslan, Mustafa Özdemir, Lütfullah Kuddusi Numerical study of the influence of magnetic field and throughflow on the onset of thermo-bio-convection in a Forchheimer‑extended Darcy-Brinkman porous nanofluid layer containing gyrotactic microorganisms Arpan Garg, Y.D. Sharma, Subit K. Jain, Sanjalee Maheshwari A nanofluid couple stress flow due to porous stretching and shrinking sheet with heat transfer A. B. Vishalakshi, U.S. Mahabaleshwar, V. Anitha, Dia Zeidan ROTATING WAVY CYLINDER ON BIOCONVECTION FLOW OF NANOENCAPSULATED PHASE CHANGE MATERIALS IN A FINNED CIRCULAR CYLINDER Noura Alsedais, Sang-Wook Lee, Abdelraheem Aly Porosity Impacts on MHD Casson Fluid past a Shrinking Cylinder with Suction Annuri Shobha, Murugan Mageswari, Aisha M. Alqahtani, Asokan Arulmozhi, Manyala Gangadhar Rao, Sudar Mozhi K, Ilyas Khan CREEPING FLOW OF COUPLE STRESS FLUID OVER A SPHERICAL FIELD ON A SATURATED BIPOROUS MEDIUM Shyamala Sakthivel , Pankaj Shukla, Selvi Ramasamy
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集 価格及び購読のポリシー Begell House 連絡先 Language English 中文 Русский Português German French Spain