ライブラリ登録: Guest
Heat Pipe Science and Technology, An International Journal

年間 4 号発行

ISSN 印刷: 2151-7975

ISSN オンライン: 2151-7991

EXPERIMENTAL ANALYSIS OF THERMOPHYSICAL AND MECHANICAL CHARACTERISTICS OF AlSiCp METAL MATRIX COMPOSITE

巻 5, 発行 1-4, 2014, pp. 207-212
DOI: 10.1615/HeatPipeScieTech.v5.i1-4.210
Get accessGet access

要約

The objective of the present investigation was to characterize the thermo-physical and mechanical properties of AlSiC MMC suitable for heat pipes. In this paper an overview of AlSiC (p) metal matrix composite is presented through: production techniques, effects of reinforcements, mechanical, thermo-physical properties and heat transfer characteristics of the AlSiC (p) MMC. AlSiC (p) (Al-7075 and 13% by vol. SiC particles with 25 μm size) based cylindrical work piece (55 mm φ, 150 mm) was manufactured by stir casting method. Considering the applications of AlSiC (p) MMC in heat pipe technology, tests involving Tensile strength, Compressive Strength, Optical and SEM analysis, relative density and porosity were conducted on the manufactured workpiece. The uniformity of Silicon particle distribution in matrix was observed by SEM analysis. Results show increased density of AlSiC (p) MMC resulting in reduced porosity, higher strength, hardness and grain size reduction are achieved by increasing the weight percent of SiC (p).

794 記事の閲覧数 7 記事のダウンロード 記事の統計
794 記事の閲覧数 7 記事のダウンロード Google
Scholar
引用数

類似内容の記事:

TRIBO-MECHANICAL PERFORMANCE OF SILICON CARBIDE-REINFORCED AA6061 METAL MATRIX COMPOSITES USING THE TAGUCHI METHODOLOGY Composites: Mechanics, Computations, Applications: An International Journal, Vol.8, 2017, issue 1
Arun Kumar Rout, Manoj Kumar, Banabihari Nayak
EXPERIMENTAL INVESTIGATION OF SURFACE HARDNESS AND DRY SLIDING WEAR BEHAVIOR OF AA7050/B4Cp High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.19, 2015, issue 3-4
P. K. Giridharan, R. Ranjith
CHARACTERIZATION OF TRIBOLOGICAL AND MECHANICAL PROPERTIES OF AA7050/Al2O3 COMPOSITES AT ELEVATED TEMPERATURE High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.25, 2021, issue 4
P. K. Giridharan, S. Nalin Vimal Kumar, R. Ranjith, V. P. Pradeep
SYNTHESIS AND EVALUATION OF COPPER STRENGTHENED WITH 3 wt.% TiC AND/OR Al2O3 PREPARED BY SPS TECHNIQUE Composites: Mechanics, Computations, Applications: An International Journal, Vol.12, 2021, issue 2
Fadel S. Hamid, Omayma A. El-kady, A. R. S. Essa, A. El-Nikhaily, Ayman Elsayed
IMPACT TOUGHNESS OF NANOCOMPOSITE MATERIALS FILLED WITH FULLERENE C60 PARTICLES Composites: Mechanics, Computations, Applications: An International Journal, Vol.9, 2018, issue 2
M. Yu. Amelin, S. V. Panin, А. А. Sapronov, A. V. Buketov, N. N. Buketova, Mykola V. Brailo, P. О. Maruschak
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集 価格及び購読のポリシー Begell House 連絡先 Language English 中文 Русский Português German French Spain