Heat Pipe Science and Technology, An International Journal
年間 4 号発行
ISSN 印刷: 2151-7975
ISSN オンライン: 2151-7991
巻 2, 2011 発行 1-4
DOI: 10.1615/HeatPipeScieTech.v2.i1-4
NONINTRUSIVE MEASUREMENT OF THE MASS FLOW RATE INSIDE A CLOSED LOOP TWO-PHASE THERMOSYPHON
pp. 1-12
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.20
EXPERIMENTAL COMPARISON OF THE HEAT TRANSFER PERFORMANCE OF MICROCHANNEL GEOMETRIES
pp. 13-26
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.30
A TWO-PHASE REVERSE THERMOSYPHON WITH TWO WORK AGENTS
pp. 27-29
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.40
USE OF HEAT PIPES FOR ELECTRONICS BLOCK THERMOSTATING OF MAGNETIC MEASUREMENT SYSTEM FIXED ON SPACE VEHICLE
pp. 31-41
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.50
PERFORMANCE OF GEOTHERMAL THERMOSYPHON USING PROPANE
pp. 43-53
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.60
REGULATING CHARACTERISTICS OF THERMAL CONTROL SYSTEMS ON THE BASIS OF VARIABLE CONDUCTANCE HEAT PIPES AT VARIABLE HEAT GENERATION AND EXTERNAL HEAT EXCHANGE CONDITIONS
pp. 55-67
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.70
EXPERIMENTAL STUDY OF THE EFFECTS OF VIBRATION AND HORIZONTAL ANGLE ON THE DYNAMICS OF STARTUP AND TRANSIENT REGIMES OF THE HEAT PIPE
pp. 69-78
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.80
INVESTIGATION OF THE GUIDE INSERTIONS INFLUENCE ON THE CONDENSATION OF WATER IN A NARROW GAP CONDENSER OF A LOOP HEAT PIPE
pp. 79-87
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.90
FULLSCALE THERMAL VACUUM TESTS OF BELARUSIAN SPACECRAF
pp. 89-99
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.100
IMPROVEMENT OF OPERATION EFFECTIVENESS OF A CLOSED GEOTHERMAL HEAT EXCHANGER DUE TO IMPLEMENTATION OF ACTIVE INSULATION OF THE EXTRACTION ELEMENT
pp. 101-113
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.110
RESEARCH AND DEVELOPMENT ON PERFORMANCES OF LARGE-SIZED THERMOELECTRIC MODULE WITH HEAT PIPES
pp. 115-120
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.120
TWO-PHASE SYSTEMS FOR LIGHT-EMITTING DIODES COOLING
pp. 121-131
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.130
PROGRAM TOOLKIT FOR MODELING AND OPTIMIZATION OF ADSORPTION AND CHEMICAL HEAT PUMPS AND REFRIGERATORS
pp. 133-143
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.140
AUTONOMOUS THERMOSIPHON SYSTEM FOR WWER 1000 COOLDOWN
pp. 145-159
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.150
VISUALIZATION OF A LOOP HEAT PIPE USING NEUTRON RADIOGRAPHY
pp. 161-172
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.160
THERMALLY POWERED ADSORPTION CYCLES: THE QUEST FOR SUSTAINABLE COOLING
pp. 173-184
DOI: 10.1615/HeatPipeScieTech.v2.i1-4.170
最新号
PREFACE: SELECTED PAPERS FROM THE JOINT 18TH INTERNATIONAL HEAT PIPE CONFERENCE AND THE 12TH INTERNATIONAL HEAT PIPE SYMPOSIUM
FLUID FLOW AND HEAT TRANSFER CHARACTERISTICS OF A JEST-TYPE LOOP THERMOSYPHON
EFFECT OF CONDENSER TEMPERATURE ON THE START-UP OF A PULSATING HEAT PIPE
DESIGN, MANUFACTURING, AND CHARACTERIZATION OF COPPER CAPILLARY STRUCTURES FOR LOOP HEAT PIPES
INNOVATIVE THERMAL DESIGN SATELLITE WITH NETWORKED VARIABLE-CONDUCTANCE OSCILLATING HEAT PIPES
THERMAL MANAGEMENT USING COPPER-METHANOL HEAT PIPES FOR RADIO TRANSMITTER SYSTEMS
EXPERIMENTAL STUDY OF THE PERFORMANCE OF WATER–COPPER SCREEN MESH WICK HEAT PIPES OPERATING IN POWER CYCLES