ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Journal of Enhanced Heat Transfer
インパクトファクター: 0.562 5年インパクトファクター: 0.605 SJR: 0.175 SNIP: 0.361 CiteScore™: 0.33

ISSN 印刷: 1065-5131
ISSN オンライン: 1026-5511

Journal of Enhanced Heat Transfer

DOI: 10.1615/JEnhHeatTransf.2015014433
pages 177-197

EFFECT OF ASPECT RATIO ON EVAPORATION HEAT TRANSFER AND PRESSURE DROP OF R-410A IN FLATTENED MICROFIN TUBES

Nae-Hyun Kim
Department of Mechanical Engineering, Incheon National University, 12-1 Songdo-Dong, Yeonsu-Gu Inchon, 22012, Korea

要約

In this study, evaporation heat transfer coefficients and pressure drops of R-410A were obtained in flattened microfin tubes (AR = 2, 4) made from 7.0 mm O.D. round microfin tube. The test range covered mass flux from 200 to 400 kg/m2s. The heat flux and saturation temperature were fixed at 10 kW/m2 and 15° C. Both the evaporation heat transfer coefficient and the frictional pressure drop increased as quality or mass flux increased. They also increased as the tube aspect ratio increased. The heat transfer enhancement ratio ranged from 1.51 to 3.08, which increased as mass flux decreased. However, the pressure drop penalty factors were less than 1.0. Comparison with existing round microfin tube correlations was made.