年間 8 号発行
ISSN 印刷: 1065-5131
ISSN オンライン: 1563-5074
Indexed in
EXPERIMENTAL INVESTIGATION OF CONVECTIVE HEAT TRANSFER OF SINGLE AND MULTI-WALLED CARBON NANOTUBES/WATER FLOW INSIDE HELICAL ANNULI
要約
The aim of the present investigation is to study the effect of adding single-walled and multi-walled carbon nanotubes to distilled water upon the heat transfer characteristics of the flow in helical annuli. The helical annulus is formed by twisting a straight double-tube heat exchanger. The outer surface of the helical annulus is adiabatic, while a hot fluid goes through the core helical tube providing heat source for heating the cool fluid passing through the annulus. Three double-tube coils with annulus curvature ratios of 0.0375, 0.071, and 0.123 are prepared and tested to assess the effect of the coil geometry on the heat transfer. Other parameters, such as Reynolds number, nanofluid volume fraction, and the type of carbon nanotubes are investigated, as well. Based on the experimental data, the nanofluid flow shows much higher Nusselt numbers compared to the base fluid flow. Finally, to predict the Nusselt number, a correlation is proposed using least-square method where a reasonable agreement is observed between the predicted Nusselt numbers and the experimental counterparts.
-
Akhavan-Behabadi, M.A., Pakdaman, M.F., and Ghazvini, M., Experimental Investigation on the Con- vective Heat Transfer of Nanofluid Flow inside Vertical Helically Coiled Tubes under Uniform Wall Temperature Condition, Int. Commun. Heat Mass Trans., vol. 39, no. 4, pp. 556-564,2012.
-
Al-Sammarraie, A.T. and Vafai, K., Heat Transfer Augmentation through Convergence Angles in a Pipe, Numeric. Heat Trans. Part A: Appl., vol. 72, no. 3, pp. 197-214,2017.
-
Al-Sammarraie, A.T. and Vafai, K., Thermal-Hydraulic Performance Analysis of a Convergent Double Pipe Heat Exchanger, J. Heat Transf., vol. 141, no. 5, p. 051001,2019.
-
Assael, M.J., Chen, C.-F., Metaxa I., and Wakeham, W.A., Thermal Conductivity of Suspensions of Carbon Nanotubes in Water, Int. J. Thermophys., vol. 25, no. 4, pp. 971-985,2004.
-
Assael, M. J., Metaxa, I.N., Arvanitidis, J., Christofilos, D., and Lioutas, C., Thermal Conductivity Enhancement in Aqueous Suspensions of Carbon Multi-Walled and Double-Walled Nanotubes in the Presence of Two Different Dispersants, Int. J. Thermophys, vol. 26, no. 3, pp. 647-664,2005.
-
Cioncolini, A. and Santini, L., An Experimental Investigation Regarding the Laminar to Turbulent Flow Transition in Helically Coiled Pipes, Exp. Therm. FluidSci., vol. 30, no. 4, pp. 367-380,2006.
-
Choi, S.U.S. and Eastman, J.A., Enhancing Thermal Conductivity of Fluids with Nanoparticles, Developments and Applications of Non-Newtonian Flow, ASME-Publications-Fed, vol. 231, pp. 99-105,1995.
-
Ding, Y., Alias, H., Wen D., and Williams, R.A., Heat Transfer of Aqueous Suspensions of Carbon Nanotubes (CNT Nanofluids), Int. J. Heat Mass Transf., vol. 49, no. 1, pp. 240-250,2006.
-
Eastman, J.A., Phillpot, S.R., Choi, S.U.S., and Keblinski, P., Thermal Transport in Nanofluids, Annu. Rev. Mater. Res., vol. 34, pp. 219-246,2004.
-
Fard, A.M., Mirjalily, S.A.A., and Ahrar, A.J., Influence of Carbon Nanotubes on Pressure Drop and Heat Transfer Rate of Water in Helically Coiled Tubes, J. Enhanced Heat Trans., vol. 26, no. 3, pp. 217-233, 2019.
-
Garg, P., Alvarado, J.L., Marsh, C., Carlson, T.A., Kessler, D.A., and Annamalai, K., An Experimental Study on the Effect of Ultrasonication on Viscosity and Heat Transfer Performance of Multi-Wall Carbon Nanotube-Based Aqueous Nanofluids, Int. J. Heat Mass Transf., vol. 52, pp. 5090-5101,2009.
-
Guo, Z., Heat Transfer Enhancement-A Brief Review of 2018 Literature, J. Enhanced Heat Transf., vol. 26, no. 4, pp. 429-449,2019.
-
Guo, Z., A Review on Heat Transfer Enhancement with Nanofluids, J. Enhanced Heat Transf., vol. 27, no. 1,pp. 1-70,2020. DOI: 10.1615/JEnhHeatTransf.2019031575.
-
Hashemi, S. and Akhavan-Behabadi, M.A., An Empirical Study on Heat Transfer and Pressure Drop Characteristics of CuO-Base Oil Nanofluid Flow in a Horizontal Helically Coiled Tube under Constant Heat Flux, Int. Commun. Heat Mass Transf., vol. 39, no. 1, pp. 144-151,2012.
-
Indhuja, A., Suganthi, K.S., Manikandan, S., and Rajan, K.S., Viscosity and Thermal Conductivity of Dispersions of Gum Arabic Capped MWCNT in Water: Influence of MWCNT Concentration and Temperature, J. Taiwan Ins. Chem. Eng., vol. 44, no. 3, pp. 474-479,2013.
-
Jayakumar, J.S., Mahajani, S.M., Mandal, J.C., Vijayanb, P.K., and Bhoi, R., Experimental and CFD Estimation of Heat Transfer in Helically Coiled Heat Exchangers, Chem. Eng. Res. Design, vol. 86, no. 3, pp. 221-232,2008.
-
Kahani, M., Heris, S.Z., and Mousavi, S.M., Comparative Study between Metal Oxide Nanopowders on Thermal Characteristics of Nanofluid Flow through Helical Coils, Powder Tech., vol. 246, pp. 82-92, 2013.
-
Kumar, S., Kothiyal, A.D., Bisht, M.S., and Kumar, A., Effect of Nanofluid Flow and Protrusion Ribs on Performance in Square Channels: An Experimental Investigation, J. Enhanced Heat Transf., vol. 26, no. 1,pp. 75-100,2019.
-
Manlapaz, R. and Churchill, S.W., Fully Developed Laminar Convection from a Helical Coil, Chem. Eng. Commun, vol. 9, pp. 185-200,1981.
-
Moffat, R.J., Describing the Uncertainties in Experimental Results, Exp. Therm. Fluid Sci., vol. 1, no. 1, pp. 3-17,1988.
-
Prabhanjan, D., Raghavan, G., and Rennie, T., Comparison of Heat Transfer Rates between a Straight Tube Heat Exchanger and a Helically Coiled Heat Exchanger, Int. Commun. Heat Mass Transf, vol. 29, no. 2, pp. 185-191,2002.
-
Salimpour, M.R., Heat Transfer Characteristics of a Temperature-Dependent-Property Fluid in Shell and Coiled Tube Heat Exchangers, Int. Commun. Heat Mass Trans., vol. 35, no. 9, pp. 1190-1195,2008.
-
Salimpour, M.R., Heat Transfer Coefficients of Shell and Coiled Tube Heat Exchangers, Exp. Therm. Fluid Sci., vol. 33, no. 2, pp. 203-207,2009.
-
Salimpour, M.R., Bahiraee, F., Akbari, S., Analytical Design of Helically Coiled Heat Exchangers Used for Transient Heat Transfer Applications, in ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting: Volume 1, Symposia-Parts A, B, and C, Montreal, Canada, pp. 1635-1643,2010.
-
Shahsavar, A., Saghafian, M., Salimpour, M.R., and Shafii, M.B., Effect of Temperature and Concentration on Thermal Conductivity and Viscosity of Ferrofluid Loaded with Carbon Nanotubes, Heat Mass Transf., vol. 52, pp. 2293-2301,2016a.
-
Shahsavar, A., Salimpour, M.R., Saghafian, M., and Shafii, M.B., Effect of Magnetic Field on Thermal Conductivity and Viscosity of a Magnetic Nanofluid Loaded with Carbon Nanotubes, J. Mech. Sci. Tech., vol. 30, no. 2, pp. 809-815,2016b.
-
Shahsavar, A., Saghafian, M., Salimpour, M.R., and Shafii, M.B., Experimental Investigation on Laminar Forced Convection Heat Transfer of Ferrofluid Loaded with Carbon Nanotubes under Constant and Alternating Magnetic Fields, Exp. Therm. Fluid Sci., vol. 76, pp. 1-11,2016c.
-
Shokouhmand, H., Salimpour, M.R., and Akhavan-Behabadi, M.A., Experimental Investigation of Shell and Coiled Tube Heat Exchangers Using Wilson Plots, Int. Commun. Heat Mass Transf., vol. 35, no. 1, pp. 84-92, 2008.
-
Vashisth, S., Kumar, V., and Nigam, K.D., A Review on the Potential Applications of Curved Geometries in Process Industry, Indust. Eng. Chem. Res., vol. 47, no. 10, pp. 3291-3337,2008.
-
Xuan, Y. and Li, Q., Heat Transfer Enhancement of Nanofluids, Int. J. Heat Fluid Flow, vol. 21, no. 1, pp. 58-64, 2000.
-
Yu, W. and Xie, H., A Review on Nanofluids: Preparation, Stability Mechanisms, and Applications, J. Nanomater., vol. 2012, p. 435873,2012.
-
Yousefi Tireh Shabankare Ali, Mirjalily Seyed Ali Agha, Oloomi Seyed Amir Abbas, Salimpour Mohammad Reza, Evaluation of flow and heat transfer in the condensation of R-406a vapor in circular tubes with extended surface of twisted fins, Chemical Engineering Communications, 2021. Crossref
-
Mesgarpour Mehrdad, Mir Massoud, Alizadeh Rasool, Abad Javad Mohebbi Najm, Borj Ehsan Pooladi, An evaluation of the thermal behaviour of a lithium-ion battery pack with a combination of pattern-based artificial neural networks (PBANN) and numerical simulation, Journal of Energy Storage, 47, 2022. Crossref
-
Hai Tao, Abidi Awatef, Zain Jasni Mohamad, Sajadi S. Mohammad, Mahmoud Mustafa Z., Aybar Hikmet Ş., Assessment of using solar system enhanced with MWCNT in PCM-enhanced building to decrease thermal energy usage in ejector cooling system, Journal of Building Engineering, 55, 2022. Crossref
-
Fuxi Shi, Sina Nima, Sajadi S. Mohammad, Mahmoud Mustafa Z., Abdelrahman Anas, Aybar Hikmet Ş., Artificial neural network modeling to examine spring turbulators influence on parabolic solar collector effectiveness with hybrid nanofluids, Engineering Analysis with Boundary Elements, 143, 2022. Crossref
-
Fuxi Shi, Sina Nima, Ahmadi Amir, Malekshah Emad Hasani, Mahmoud Mustafa Z., Aybar Hikmet Ş., Effect of different pitches on the 3D helically coiled shell and tube heat exchanger filled with a hybrid nanofluid: Numerical study and artificial neural network modeling, Engineering Analysis with Boundary Elements, 143, 2022. Crossref
-
Hai Tao, Abidi Awatef, Wang Lei, Ghaderi M., Mahmoud Mustafa Z., Rawa Muhyaddin J.H., Aybar Hikmet Ş., Thermal analysis of building benefits from PCM and heat recovery- installing PCM to boost energy consumption reduction, Journal of Building Engineering, 58, 2022. Crossref
-
Ajour Mohammed N., Abduaal Mohammed J., Hariri Fahd A., Abu-Hamdeh Nidal H., Karimipour Arash, Reducing electricity demand by integrating a sustainable pack into HVAC- adding PCM in sustainable pack as well as building envelopes, Journal of Building Engineering, 57, 2022. Crossref
-
Alnaqi Abdulwahab A., Alsarraf Jalal, Al-Rashed Abdullah A.A.A., Transient numerical study on injecting PCM in buildings along with extra comfort ventilation: Use of artificial neural network to decline energy utilization, Engineering Analysis with Boundary Elements, 143, 2022. Crossref
-
Alghamdi Sultan M., Ajour Mohammed N., Abu-Hamdeh Nidal H., Karimipour Arash, Using PCM for building energy management to postpone the electricity demand peak load and approving a new PID controller to activate alternative chiller, Journal of Building Engineering, 57, 2022. Crossref
-
Khdair Adnan I., Rumman Ghaida Abu, Adopting PCM and natural ventilation in buildings to reduce energy demand in HVAC -Examining various PCM along with various natural ventilation scenarios, Journal of Building Engineering, 57, 2022. Crossref
-
Asiri Saeed A., Salilih Elias M., Alfawaz Khaled M., Alogla Ageel F., Sajadi S. Mohammad, Nusier Osama K., Heat transfer analysis of a water/lithium-bromide vapor generator system used for battery thermal development, Journal of Energy Storage, 53, 2022. Crossref
-
Fagehi Hassan, Hadidi Haitham M., Toward buildings with lower power demand in the smart city of NEOM-incorporating phase change material into building envelopes, Sustainable Energy Technologies and Assessments, 53, 2022. Crossref
-
Asiri Saeed A., Salilih Elias M., Alfawaz Khaled M., Alogla Ageel F., Sajadi S. Mohammad, Nusier Osama K., Transient heat transfer analysis of serially connected array of phase change material in the thermal battery units with Al2O3 working Nano fluids, Journal of Energy Storage, 53, 2022. Crossref