High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
年間 4 号発行
ISSN 印刷: 1093-3611
ISSN オンライン: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
巻 21, 2017 発行 1
DOI: 10.1615/HighTempMatProc.v21.i1
DEPTH PROFILING OF ELEMENTAL COMPOSITION OF SPRAYED LAYERS USING LASER-INDUCED BREAKDOWN SPECTROSCOPY
pp. 1-12
DOI: 10.1615/HighTempMatProc.2017019888
NITRIDING OF COMMERCIAL PURE TITANIUM IN THE PLASMA OF FREQUENCY-PULSED NON-SELF-SUSTAINED GLOW DISCHARGE WITH A HOLLOW CATHODE AT LOW PRESSURE
pp. 13-23
DOI: 10.1615/HighTempMatProc.2017020052
DETERMINATION OF THE MECHANICAL THRESHOLD STRESS IN RELATION TO AUSTENITIC STAINLESS STEEL 00H21AN16G5M4Nb
pp. 25-35
DOI: 10.1615/HighTempMatProc.2017019344
POST-PROCESSING OF CERAMIC OXIDE AND METALLIC COATED SURFACES USING MICROWAVE GLAZING
pp. 37-52
DOI: 10.1615/HighTempMatProc.2017020399
COMPLEX ELECTRON−ION PLASMA TREATMENT OF TITANIUM: METHODS, STRUCTURE, PROPERTIES
pp. 53-64
DOI: 10.1615/HighTempMatProc.2017021265
AN EXPERIMENTAL INVESTIGATION OF FLAT WIRE ELECTRODES AND THEIR WELD BEAD QUALITY IN THE FCAW PROCESS
pp. 65-79
DOI: 10.1615/HighTempMatProc.2017020308
INFLUENCE OF THE ANODIZING TEMPERATURE ON THE MECHANICAL PROPERTIES OF HIGHLY POROUS ANODIC ALUMINA OBTAINED USING HIGH-VOLTAGE ELECTROCHEMICAL OXIDATION
pp. 81-90
DOI: 10.1615/HighTempMatProc.2017021404
最新号
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
ELECTRON-BEAM SYNTHESIS OF ZIRCONIA CERAMIC COATINGS IN THE FOREVACUUM PRESSURE RANGE
INCREASING THE WEAR RESISTANCE OF TITANIUM ALLOYS BY DEPOSITION OF A MODIFYING COATING (Zr,Nb)N
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
近刊の記事
Application of a non-self-sustained glow discharge initiated by a focused electron beam in the forevacuum pressure region for nitriding the inner surface of narrow metal tubes
PLASMA DISCHARGE IN LIQUID MEDIA UNDER THE EFFECT OF ULTRASOUND FOR THE SYNTHESIS OF FILLERS FOR POLYMER COMPOSITES WITH ENHANCED MECHANICAL STRENGTH AND GAS PERMEABILITY
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products