ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN 印刷: 1093-3611
ISSN オンライン: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.2015015733
pages 19-27

PLASMA-CATHODE ELECTRON SOURCE BASED ON A LOW-PRESSURE ARC DISCHARGE IN THE MODE OF THE EMISSION CURRENT ENHANCEMENT

T. V. Koval
National Research Tomsk Polytechnic University, 30 Lenin Ave., Tomsk, 634050, Russia
Vladimir N. Devyatkov
Institute of High Current Electronics, Siberian Branch of the Russian Academy of Sciences, 2/3 Akademichesky Ave., Tomsk, 634055, Russia
Bao Hung Nguyen
National Research Tomsk Polytechnic University, 30 Lenin Ave., Tomsk, 634050, Russia
Vladimir V. Uglov
Belarusian State University, 4 Nezavisimost Ave., Minsk, 220030, Belarus; National Research Tomsk Polytechnic University, 2a Lenin Ave., Tomsk, 634028, Russia

要約

In the electron beam source based on a plasma cathode with a grid-stabilized plasma emission boundary, the anode plasma significantly affects the limited parameters of the source and widely determines the main characteristics of the source. This paper describes a theoretical and experimental investigation of the discharge plasma generation and the significant increasing mode of the electron emission current in the plasma electron source based on a low-pressure arc discharge. The source works at a pressure of 0.02−0.05 Pa, an accelerating voltage of 10 kV, and a longitudinal magnetic field of 0.1 T. According to experiment and theory, plasma potential depends on the electric field that penetrates from the accelerating gap of anode plasma through the grid meshes, on the discharge current, gas pressure, grid geometric transparency, and on the gas type. It is shown that the basic mechanisms corresponding to the discharge current enhancement and emission current are associated with the secondary ion-electron emission of electrons in the plasma cathode and transport channel on the grid electrode, the presence of positive feedback between the plasma cathode generation area and electron beam transport channel.


Articles with similar content:

WIDE-APERTURE ELECTRON SOURCE WITH A PLASMA GRID EMITTER
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.19, 2015, issue 1
M. S. Vorobyov, Bao Hung Nguyen, T. V. Koval
PLASMA SOURCE WITH A COLD HOLLOW CATHODE BASED ON ARC DISCHARGE
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.17, 2013, issue 2-3
Yury Akhmadeev, P. M. Schanin, Nikolay N. Koval
Transients in the HCN-Laser Plasma
Telecommunications and Radio Engineering, Vol.53, 1999, issue 7-8
Yu. Ye. Kamenev
INVESTIGATIONS OF VOLUME-CENTERED DISCHARGE IN AIR SUPERSONIC FLOW WHEN PROPANE IS ADDITIONALLY INJECTED IN THE DISCHARGE CATHODE REGION
TsAGI Science Journal, Vol.47, 2016, issue 8
M. V. Rybakov, Andrey Yuryevich Urusov, Vyacheslav Konstantinovich Alatortsev, Vladimir Vladimirovich Skvortsov, Ivan Sergeevich Inshakov, Aleksandr Fedorovich Rozhkov, Sergei Ivanovich Inshakov, Aleksandr Aleksandrovich Uspenskii
EXPERIENCE IN THE SYNTHESIS OF DIAMOND FROM A SUPERSONIC MICROWAVE PLASMA JET
Interfacial Phenomena and Heat Transfer, Vol.7, 2019, issue 2
Ivan B. Yudin, A. K. Rebrov, M. S. Bobrov, Nikolay I. Timoshenko, A. A. Emelyanov, Michael Yu. Hrebtov