ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
SJR: 0.137 SNIP: 0.341 CiteScore™: 0.43

ISSN 印刷: 1093-3611
ISSN オンライン: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v9.i3.70
pages 401-413

MACROCRACK FORMATION IN PLASMA-SPRAYED YSZ TBCS WHEN SPRAYING THICK PASSES

A. Tricoire
SPCTS, 123 avenue Albert Thomas, 87060 Limoges cedex, France
Michel Vardelle
LMCTS-URA 320, University of Limoges, 123 Avenue Albert Thomas -87060 Limoges Cedex - France
Pierre Fauchais
Laboratoire Sciences des Procedes Ceramiques et de Traitements de Surface UMR CNRS 6638 University of Limoges 123 avenue Albert Thomas, 87060 LIMOGES - France
F. Braillard
SNECMA Services, ZI Nord, 1 rue Maryse Bastie, BP 129, 86101 Chatellerault cedex, France
A. Malie
SNECMA Services, ZI Nord, 1 rue Maryse Bastie, BP 129, 86101 Chatellerault cedex, France
P. Bengtsson
SNECMA Moteurs, RN 7, BP 81, 91003 Evry cedex, France

要約

The aim of this work is to study the formation of macrocracks orthogonal to the substrate in yttria-stabilised zirconia coatings, deposited in one or two thick passes (more than a hundred urn each), by a direct current (DC) plasma torch. Zirconia was air plasma sprayed on Hastelloy X substrates, with a NiCrAlY bond coat. The different parameters, which control this phenomenon, are considered through a statistical approach. A special attention is devoted to the quenching stress during deposition. A particular resulting microstructure with columnar zirconia grains is presented. A search of the most influent spray parameters has also been conducted.


Articles with similar content:

INFLUENCE OF THE SUBSTRATE SHAPE AND INTENSITY OF THE ION ETCHING PROCESS ON ADHESION OF THE CrN COATING OBTAINED ON THE NITRIDED SUBSTRATE
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.8, 2004, issue 2
Jan Walkowicz, Jerzy Smolik, Zbigniew Slomka
D.C. Plasma Spraying: Effect of Arc root Fluctuations on Particle Behavior in the Plasma Jet
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.3, 1999, issue 2-3
Michel Vardelle, G. Mariaux, B. Dussoubs, Pierre Fauchais, Armelle Vardelle
RESULTS OF PRODUCTION TESTS AND ANALYSIS OF DESTRUCTION MECHANISMS OF HOT FORGING DIES COVERED BY THE COMPOSITE „NITRIDING LAYER/CrN COATING”
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.9, 2005, issue 2
Jan Walkowicz, Jerzy Smolik, Rafal Brudnias, Carmen Montero, Carlos Bertrand
DEVELOPMENT OF A PULSED METHOD OF CRACK GENERATION CONTROL AT THE INTERFACE BETWEEN A PLASMA SPRAYED CERAMIC THERMAL BARRIER AND ITS SUBSTRATE, USING INFRARED THERMOGRAPHY
International Heat Transfer Conference 9, Vol.4, 1990, issue
Christian Martin, H. Arbouch, Pierre Fauchais
Comparison of Approaches to Numerical Solution of the Problem on the Electromagnetic Wave Propagation in a Medium with Time-Dependent Parameters
Telecommunications and Radio Engineering, Vol.53, 1999, issue 4-5
K. M. Yemelyanov, A. G. Nerukh