ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN 印刷: 1093-3611
ISSN オンライン: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v8.i4.80
pages 585-598

LOW CURRENT TRANSFERRED ARC AND ANODE ATTACHMENT : EFFECT OF GAS COMPOSITION AND THE TILTING ANGLE

C. Chazelas
Laboratoire Sciences des Procédés Céramiques et de Traitements de Surface, ENSIL,16 rue d'Atlantis, 87068 LIMOGES Cedex, France
J. F. Coudert
Laboratoire Sciences des Procédés Céramiques et Traitements de Surface, UMR-CNRS 6638, Université de Limoges, 87060 Limoges Cedex, France
Pierre Fauchais
Laboratoire Sciences des Procedes Ceramiques et de Traitements de Surface UMR CNRS 6638 University of Limoges 123 avenue Albert Thomas, 87060 LIMOGES - France
Alain Grimaud
L.E.T.P., Faculté des Sciences, 2 Bd Lavoisier 49045 Angers Cedex, France

要約

The experimental study of heat transfer between a direct current electric arc and its anode is of primary importance for the understanding of mechanisms involved, for example, in plasma cutting, metal purification, extractive metallurgy, powder synthesis.... The ultimate objective of this work is to produce nanometric particles from the condensation of metallic vapors obtained by controlled evaporation of the anode material. A transferred arc reactor was designed to generate a stable arc jet, less than 3mm in diameter, using pure argon, argon-hydrogen mixture or nitrogen as plasma forming gases (4−10 slm) and power supplied by a current regulated source (I = 15−40A). According to the nozzle internal diameter used to constrict the arc, the jet velocity is over 1000 m.s−1 and the angle between the jet axis and the normal to the anode surface can be changed from 0° to 85°. Arc voltage fluctuations and heat power to the anode were measured for various experimental conditions, leading to different attachment modes, as testified by video-records.


Articles with similar content:

ANALYSIS OF PLASMA JETS GENERATED IN GAS AND GAS-WATER TORCHES
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.11, 2007, issue 1
T. Kavka, A. Maslani, O. Chumak, V. Sember, Vladimir Kopecky
MONITORING WATER VAPOUR PLASMA JETS ADMIXED WITH ARGON USING CHROMATIC OPTICAL SENSING TECHNIQUES
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.8, 2004, issue 2
Milan Hrabovsky, G. R. Jones, B. E. Djakov, Vladimir Kopecky
FROM TRANSFERRED ARC TO PLASMA TORCHES
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.9, 2005, issue 2
J. F. Coudert, C. Chazelas, D. Rigot, V. Rat
PLASMA SPRAYED COATINGS OF MECHANOFUSED ALUMINA-STEEL PARTICLES
Progress in Plasma Processing of Materials, 1999, Vol.1, 1999, issue
Helene Ageorges, Alain Grimaud, Pierre Fauchais
Surfatron-Produced Atmospheric-Pressure Plasma Jet Applied to Candida Biofilms
Plasma Medicine, Vol.8, 2018, issue 4
Homero S. Maciel, Fernanda R. Figueira, Anelise C.O.C. Doria, J. S. B. Lima, Sonia Khouri, S. Pessoa