ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
SJR: 0.137 SNIP: 0.341 CiteScore™: 0.43

ISSN 印刷: 1093-3611
ISSN オンライン: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v9.i2.30
pages 211-226

Fast modelling of plasma jet and particle behaviours in spray conditions

Guy Delluc
Laboratoire Sciences des Precedes Ceramiques et Traitements de Surfaces UMR CNRS 6638, 123 avenue Albert Thomas 87060 Limoges Cedex
Helene Ageorges
University of Angers, LETP, 2 Boulevard Lavoisier, 49045 Angers Cedex, France
Bernard Pateyron
Laboratoire SPCTS UMR CNRS 7315, ENSCI, Centre Europeen de la Ceramique, Limoges, France
Pierre Fauchais
Laboratoire Sciences des Procedes Ceramiques et de Traitements de Surface UMR CNRS 6638 University of Limoges 123 avenue Albert Thomas, 87060 LIMOGES - France

要約

This paper presents a simplified code allowing to find in a few minutes the trends of the d.c. plasma spray process, at least for a single particle in flight. It is based on a parabolic two dimension (2D) flow for the plasma jet and a three dimension (3D) calculation for the heat and momentum transfer to a single particle. It neglects the carrier gas flow rate- plasma flow interaction but the obtained trends are in good agreement with those obtained with 3D sophisticated codes. However results depend strongly on the turbulence model, the plasma effect corrections chosen for the heat and momentum transfer. Thus, as with 3D codes, the model has to be backed by experiments. It can be used to train operators and let them “see” almost immediately the effects of the different macroscopic spray parameters. The code and the plasma properties used can be freely downloaded.


Articles with similar content:

MODELLING OF THE INFLUENCE OF IRON AND ALUMINA PARTICLES ON A DC PLASMA TORCH
Progress in Plasma Processing of Materials, 1997, Vol.1, 1997, issue
J. J. Gonzalez, Pierre Proulx, J. M. Bauchire
CFD simulation and experimental measures on nozzel type air curtain as a protection against gaseous toxic substances
International Heat Transfer Conference 12, Vol.13, 2002, issue
Livio De Santoli, Fabrizio Cumo
THE CHARACTER OF FLOW IN THE FREE JET CLOSE TO AN ARC HEATER OUTPUT
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.13, 2009, issue 2
T. Mendl, I. Jakubova, T. Kavka, J. Senk, J. Gregor
SIMULTANEOUS MEASUREMENT OF PARTICLE SIZE AND VELOCITY BY LASER 2-FOCUS PARTICLE ANALYSER
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
H. Ueki, D. Sakaguchi, M. Ishida
Numerical Study of Flow over Ahmed Body and a Road Vehicle and the Change in Aerodynamic Characteristics Caused by Rear Spoiler
International Journal of Fluid Mechanics Research, Vol.40, 2013, issue 4
S. Abdullah, R. Zulkifli, E. Sundararajan, A. B. Mohd Sood, Behrang Daryakenari