ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN 印刷: 1093-3611
ISSN オンライン: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v6.i4.60
22 pages

CHOICE OF AN IR PYROMETER TO MEASURE THE SURFACE TEMPERATURE OF A COATING DURING ITS FORMATION IN AIR PLASMA SPRAYING

Michel Vardelle
LMCTS-URA 320, University of Limoges, 123 Avenue Albert Thomas -87060 Limoges Cedex - France
Thierry Renault
Laboratory Sciences of Ceramic and Surface Treatment Processes (SPCTS UMR-CNRS 6638) - 123, avenue Albert Thomas 87060 Limoges Cedex - France; Thermadyne Inc. 82 Benning Street, West Lebanon, NH 03784, USA
Pierre Fauchais
Laboratoire Sciences des Procedes Ceramiques et de Traitements de Surface UMR CNRS 6638 University of Limoges 123 avenue Albert Thomas, 87060 LIMOGES - France

要約

To obtain reproducible and reliable plasma sprayed coatings, it is mandatory to achieve an on-line control of a few well chosen parameters. Among them the substrate and coating surface temperature time evolution, is a key parameter. To measure it, IR pyrometers are used. The aim of this paper is to determine in which wavelength range the pyrometric measurement will not be disturbed by the direct or reflected radiation of the plasma jet, the radiation of hot particles in flight and at last the absorption by the CO2 or H2O contained in the surrounding atmosphere. Measurements and calculations performed in the 2 to 14 mm wavelength range, have shown that in the 8 - 14 mm range, the thermal radiation emitted by the in-flight particles and the plasma jet and its plume are negligible as well as the absorption by the surrounding atmosphere. Measurements close to the sprayed spot, have been performed continuously during spraying and have demonstrated the feasibility and the interest of such a pyrometer.


Articles with similar content:

Influence of I.R. radiation on target pyrometric measurement under plasma spraying conditions
Progress in Plasma Processing of Materials, 2001, Vol.0, 2001, issue
Michel Vardelle, Thierry Renault, Pierre Fauchais, Cedric Bossoutrot
OPTICAL DIAGNOSTICS TO CONTROL ON LINE MELTING OF SILICON MATERIAL TREATED BY THERMAL PLASMA PROCESS. NEW IMPROVEMENTS FACED WITH SEVERE CONDITIONS.
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.9, 2005, issue 1
Jacques Amouroux, Amaury Poidatz, Sergey V. Dresvin, S. Darwiche, Daniel Morvan, E. Francke, M. Benmansour
TITANIUM PLASMA UNDER LASER WELDING CONDITIONS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.6, 2002, issue 4
Z. Szymanski, J. Hoffman
SPATIALLY DISTRIBUTED MICROWAVE HEATING FOR ADVANCED MATERIALS PROCESSING
International Heat Transfer Conference 13, Vol.0, 2006, issue
Mohammed A Omar, Hui Zhao, Dusan P. Sekulic, Abraham J. Salazar
TIME RESOLVED LASER INDUCED BREAKDOWN SPECTROSCOPY FOR FLUORINE, CHLORINE AND SULFUR DETECTION USING AN OPTICAL FIBER PROBE
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.4, 2000, issue 1
Jacques Amouroux, P. Adam, L. Dudragne, H. Lancelin