ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Multiphase Science and Technology
SJR: 0.124 SNIP: 0.222 CiteScore™: 0.26

ISSN 印刷: 0276-1459
ISSN オンライン: 1943-6181

Multiphase Science and Technology

DOI: 10.1615/MultScienTechn.v12.i3-4.110
18 pages

HEAT TRANSFER DURING TRANSIENT COOLING OF HIGH TEMPERATURE SURFACE WITH AN IMPINGING JET

Yuichi Mitsutake
Department of Mechanical Engineering, Saga University, 1 Honjo Saga City, Saga 840-8502, Japan
Masanori Monde
Department of Mechanical Engineering, Saga University, 1 Honjo Saga City, Saga 840-8502, Japan

要約

An experimental study of transient boiling heat transfer during a cooling of a hot cylindrical block with an impinging water jet has been made at atmospheric pressure. The experimental data were taken for the following conditions: a degree of subcooling of ΔTsub = 20 − 80 K, a jet velocity of uj = 5 − 15 m/s, a nozzle diameter of dj = 2 mm and three materials of copper, brass and carbon steel. The block was initially and uniformly heated to about 250 °C and the transient temperatures in the block were measured at 8 locations in r-direction at two different depths from the surface during the cooling of hot block. The surface heat flux distribution with time was evaluated using a numerical analysis of 2D-heat conduction. Behavior of the wetting front, which is extending the nucleate boiling region outward, is observed with a high-speed video camera.
A position of wetting region is measured and it is correlated well with a power function of time. The changes in estimated heat flux and temperature were compared with the position of wetting region to clarify the effects of subcooling, jet velocity and thermal properties of block on the transient cooling.


Articles with similar content:

HEAT TRANSFER DURING TRANSIENT COOLING OF HIGH TEMPERATURE SURFACE WITH AN IMPINGING JET
Boiling 2000 Phenomena and Emerging Applications Volume 2, Vol.1, 2000, issue
Yuichi Mitsutake, Masanori Monde
JET IMPINGEMENT BOILING IN HOT SURFACES WELL ABOVE THE LIMITING TEMPERATURE FOR SOLID-LIQUID CONTACT
Multiphase Science and Technology, Vol.19, 2007, issue 2
Yuichi Mitsutake, M. A. Islam, Masanori Monde, P. L. Woodfield, A. K. Mozumder
Effect of Intial Temperature of a Hot Steel Plate on Thermal Performance of Impinging Jets During Quenching Processes
International Heat Transfer Conference 15, Vol.15, 2014, issue
Jang-Min Park, Dong-Wook Oh, Tae Hoon Kim, Jung Ho Lee, Kyu Hyung Do
BOILING AND WETTING PHENOMENA OF HOT SURFACE DURING JET IMPINGEMENT QUENCHING
International Heat Transfer Conference 13, Vol.0, 2006, issue
Yuichi Mitsutake, Masanori Monde, P. L. Woodfield, A. K. Mozumder
STUDIES ON THE SPRAY COOLING OF HOT SURFACES
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
H. Yoshida, M. Mousa, T. I. Sabry