ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
International Journal for Multiscale Computational Engineering
インパクトファクター: 1.016 5年インパクトファクター: 1.194 SJR: 0.554 SNIP: 0.68 CiteScore™: 1.18

ISSN 印刷: 1543-1649
ISSN オンライン: 1940-4352

International Journal for Multiscale Computational Engineering

DOI: 10.1615/IntJMultCompEng.v4.i5-6.110
pages 771-790

On the Implementation of Plane Stress in Computational Multiscale Modeling

Robert Lillbacka
FS Dynamics, Molndalsvagen 24, SE-412 63 Goteborg; Chalmers University of Technology, Department of Applied Mechanics, SE-412 96 Göteborg; and Swedish National Testing and Research Institute (SP), Brinellgatan 4, Box 857, SE-50115 Borås, Sweden
Fredrik Larsson
Department of Applied Mechanics, Chalmers University of Technology, S-412 96 Gothenburg
Kenneth Runesson
Department of Structural Mechanics Chalmers, University of Technology S-41296 Goteborg, Sweden

要約

Different aspects of the plane stress condition in concurrent two-scale computational (first-order) homogenization are discussed. The basic ingredient in computational homogenization is the calculation of the macroscale stress, for given macroscale deformation, via computations on a representative volume element (RVE). Two modeling assumptions are compared: The subscale (Hill-type) and macroscale-type (Taylor-type) plane stress conditions. The corresponding iterative strategies and the macroscale algorithmic tangent operators are derived using the primal (conventional) approach. The performance of the various iterative strategies are compared for a single RVE problem as well as in a fully concurrent analysis of a complex substructure (duplex stainless steel) under realistic subscale modeling based on crystal plasticity with hardening.


Articles with similar content:

ERROR CONTROLLED USE OF THE TAYLOR ASSUMPTION IN ADAPTIVE HIERARCHICAL MODELING OF DSS
International Journal for Multiscale Computational Engineering, Vol.13, 2015, issue 2
Robert Lillbacka, Kenneth Runesson, Fredrik Larsson
COMPARATIVE ANALYSIS OF NUMERICAL DISCRETE AND FINITE ELEMENT MODELS: THE CASE OF IN-PLANE LOADED PERIODIC BRICKWORK
Composites: Mechanics, Computations, Applications: An International Journal, Vol.4, 2013, issue 4
Antonio Cazzani, Daniele Baraldi, Emanuele Reccia, Antonella Cecchi
Composite Grid Atomistic Continuum Method: An Adaptive Approach to Bridge Continuum with Atomistic Analysis
International Journal for Multiscale Computational Engineering, Vol.2, 2004, issue 3
Mark S. Shephard, Catalin Picu, D. K. Datta
Symmetric Mesomechanical Model for Failure Analysis of Heterogeneous Materials
International Journal for Multiscale Computational Engineering, Vol.8, 2010, issue 5
Caglar Oskay, Robert Crouch
Blast Analysis of Enclosure Masonry Walls Using Homogenization Approaches
International Journal for Multiscale Computational Engineering, Vol.7, 2009, issue 2
Gabriele Milani, Paulo B. Lourenco