ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
International Journal for Multiscale Computational Engineering
インパクトファクター: 1.016 5年インパクトファクター: 1.194 SJR: 0.554 SNIP: 0.68 CiteScore™: 1.18

ISSN 印刷: 1543-1649
ISSN オンライン: 1940-4352

International Journal for Multiscale Computational Engineering

DOI: 10.1615/IntJMultCompEng.v5.i3-4.30
pages 181-202

Chemical Complexity in Mechanical Deformation of Metals

Dipanjan Sen
Department of Materials Science and Engineering; and Laboratory for Atomistic and Molecular Mechanics, Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
Markus J. Buehler
Laboratory for Atomistic and Molecular Mechanics, Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA

要約

Prediction of the deformation behavior of metals in the presence of environmentally embrittling species like water or hydrogen, or under presence of organic reactive chemicals, remains a critical challenge in materials modeling. Here we propose a combination of the first principles-based reactive force field ReaxFF and the embedded atom method (EAM) in a generic multi-scale modeling framework, the Computational Materials Design Facility (CMDF), that enables the treatment of large reactive metallic systems within a classical molecular dynamics framework. Our hybrid method is based on coupling multiple Hamiltonians by weighting functions, which allows accurate modeling of chemically active sites with the reactive force field, while other parts of the system are described with the computationally less expensive EAM potential. We apply our hybrid modeling scheme in a study of fracture of a nickel single crystal under the presence of oxygen molecules. We observe that the oxide formed on the crack surface produces numerous defects surrounding the crack, including dislocations, grain boundaries, and point defects. We show that the mode of crack propagation changes from brittle crack opening at the crack tip to void formation ahead of the crack and void coalescence for lll orientation of the crack. Our results illustrate the significance of considering oxidative processes in studying deformation of metals, an aspect largely neglected in most modeling work carried out with pure EAM potentials. Our hybrid method constitutes an alternative to existing methods that are based on coupling quantum mechanical methods, such as density functional theory, to empirical potentials.


Articles with similar content:

ANALYSIS OF THE QUASI-NONLOCAL QUASICONTINUUM APPROXIMATION OF THE EMBEDDED ATOM MODEL
International Journal for Multiscale Computational Engineering, Vol.10, 2012, issue 1
Mitchell Luskin, Xingjie Helen Li
Extended Multiscale Finite Element Method for Mechanical Analysis of Periodic Lattice Truss Materials
International Journal for Multiscale Computational Engineering, Vol.8, 2010, issue 6
Hongwu Zhang, J. K. Wu, Zhendong Fu
UNCERTAINTY CLASSIFICATION AND VISUALIZATION OF MOLECULAR INTERFACES
International Journal for Uncertainty Quantification, Vol.3, 2013, issue 2
Jeffrey Greeley, Larry Curtiss, Michael E. Papka, Maria K. Y. Chan, Bin Liu, Mark Hereld, Kah Chun Lau, Aaron Knoll
APPROXIMATION OF THE SOLUTION FUNCTION FOR THE ALGORITHM OF THE NOISE-LIKE MSK SIGNAL PHASE SYNCHRONIZATION
Journal of Radio Electronics, Vol.1, 2012, issue 3
E. V. Kuzmin
Distribution of an Electronic Potential in a Cylindrical Magnetron
Telecommunications and Radio Engineering, Vol.53, 1999, issue 11
A. N. Nikitenko