ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
International Journal for Multiscale Computational Engineering
インパクトファクター: 1.016 5年インパクトファクター: 1.194 SJR: 0.554 SNIP: 0.68 CiteScore™: 1.18

ISSN 印刷: 1543-1649
ISSN オンライン: 1940-4352

International Journal for Multiscale Computational Engineering

DOI: 10.1615/IntJMultCompEng.2012001697
pages 177-184

MULTI-SCALE MODELLING OF SNOW MICROSTRUCTURE

Anna Carbone
Applied Science and Technology Department, Politecnico di Torino,Torino, Italy; ETH Zurich, Switzerland
B. M. Chiaia
Department of Structural and Geotechnical Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, I-10129 Torino, Italy
B. Frigo
Department of Structural and Geotechnical Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, I-10129 Torino, Italy
C. Turk
Applied Science and Technology Department, Politecnico di Torino, Corso Duca degli Abruzzi 24, I-10129 Torino, Italy

要約

A three-dimensional multiscale spatial model of snow with evolving microstructure is presented. Many engineering and environmental problems require a comprehensive understanding of snow behavior which arises as a consequence of phenomena spanning a wide spectrum of spatial length scales. Snow is classically described as a granular heterogeneous medium consisting of air and three water phases: ice, vapor, and liquid. The ice phase consists of grains arranged on a matrix according to a random load-bearing skeleton. The challenge is to achieve a detailed description of the mechanical and morphological characteristics of different snow microstructures that may have the same global density. Snow density can be determined by in situ measurements with quite good accuracy, and by means of the box-counting method, the fractal dimension of snow samples characterized by grains with different diameters could be determined. It was suggested that the fractal dimension can be adopted as a relevant parameter for quantifying snow morphology, in terms of the distribution of voids, and density over a wide range of spatial scales. In this work this concept is further developed. Snow density is simulated by means of a lacunar fractal, namely, a generalized Menger sponge. Then, a fully threedimensional invasive stochastic fractal model is adopted. This model performs a three-dimensional mapping of the snow density to a three-dimensional fractional Brownian field. In particular, snow samples with evolving microstructure are quantified as a continuous function of the fractal dimension.


Articles with similar content:

COMPUTATIONAL PREDICTION OF RADIATIVE PROPERTIES OF POLYMER CLOSED-CELL FOAMS WITH RANDOM STRUCTURE
Journal of Porous Media, Vol.16, 2013, issue 2
Jaona Harifidy Randrianalisoa, Dominique Baillis, Remi Coquard
POROSITY FOR FRACTAL MEDIA
Journal of Porous Media, Vol.14, 2011, issue 6
Guo-cheng Wu
Upscaling of Permeability of Porous Materials: First Insight into the Effect of Pore-Space Characteristics
International Journal for Multiscale Computational Engineering, Vol.8, 2010, issue 1
Matthias Zeiml, Roman Lackner, Herbert A. Mang, Xian Liu
LARGE-SCALE COMPUTATIONS OF EFFECTIVE ELASTIC PROPERTIES OF RUBBER WITH CARBON BLACK FILLERS
International Journal for Multiscale Computational Engineering, Vol.9, 2011, issue 3
Aurelie Jean, S. Cantournet, Francois Willot, Samuel Forest, Dominique Jeulin
FRACTIONAL BOUNDARY-LAYER FLOW AND HEAT TRANSFER OF A NANOFLUID OVER AN UNSTEADY MOVING PLATE
Heat Transfer Research, Vol.48, 2017, issue 17
Liancun Zheng, Zhi Cao, Jinhu Zhao