ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Computational Thermal Sciences: An International Journal
ESCI SJR: 0.249 SNIP: 0.434 CiteScore™: 1.4

ISSN 印刷: 1940-2503
ISSN オンライン: 1940-2554

Computational Thermal Sciences: An International Journal

DOI: 10.1615/ComputThermalScien.2017021739
pages 103-119

LAMINAR FLOW AND HEAT-TRANSFER CHARACTERISTICS OF MICROCHANNEL HEAT SINKS COMBINED WITH RIBS AND CAVITIES FOR ELECTRONIC COOLING

Hong-Ju Guo
Department of Process Equipment and Control Engineering, School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, People's Republic of China
Wei-Biao Ye
Department of Process Equipment and Control Engineering, School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, People's Republic of China
Si-Min Huang
Key Laboratory of Distributed Energy Systems of Guangdong Province, Department of Energy and Chemical Engineering, Dongguan University of Technology, Dongguan 523808, People's Republic of China
Shu-Ying Wu
Department of Process Equipment and Control Engineering, School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, People's Republic of China
De-Qi Peng
Department of Process Equipment and Control Engineering, School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, People's Republic of China

要約

Two microchannel heat sinks (MCHS) combined with ribs and cavities, with in-line and staggered arrangements, are investigated numerically. Laminar fluid flow, heat transfer, and the effects of geometric parameters on the Nusselt number and friction factor are examined. The overall performance evaluation criterion (PEC) for MCHS is used, based on thermal and hydraulic characteristics. Obtained results show that the combination of ribs and cavities can significantly prevent temperature increases along the flow direction and contributes to heat-transfer enhancement due to the interruption and redevelopment of thermal boundary layers. Additionally, the average Nusselt numbers of the two heat sinks are nearly equivalent. However, the average friction factor of the staggered arrangement is lower than that of the in-line arrangement. Thus, the PEC of the staggered arrangement is higher than that of the in-line arrangement under the same conditions. In particular, the best PEC is obtained to be Re = 320 for the two heat sinks.


Articles with similar content:

THERMOHYDRAULICS OF TURBULENT FLOW THROUGH SQUARE AND RECTANGULAR DUCTS WITH TRANSVERSE RIBS AND TWISTED TAPES WITH AND WITHOUT OBLIQUE TEETH
Journal of Enhanced Heat Transfer, Vol.18, 2011, issue 4
Sujoy Saha
Thermal and Friction Characteristics of Laminar Flow through Square and Rectangular Ducts with Transverse Ribs and Twisted Tapes with and without Oblique Teeth
Journal of Enhanced Heat Transfer, Vol.17, 2010, issue 1
Sujoy Saha, P. K. Pal
ANALYSIS OF TURBULENT CONVECTIVE HEAT TRANSFER FROM RECTANGULAR BAFFLES BY TAGUCHI METHOD
Second Thermal and Fluids Engineering Conference, Vol.17, 2017, issue
B. Sahin, I. Ates, A. Bayrakceken, Eyüphan Manay
NUMERICAL STUDY ON HEAT TRANSFER ENHANCEMENT AND FLOW STRUCTURE IN A TUBE WITH CENTRAL SLANT DEFLECTOR
International Heat Transfer Conference 16, Vol.14, 2018, issue
Peng Liu, Zhichun Liu, Jinyi Lv, Wei Liu
Geometric Optimisation of Multi-Layered Microchannel Heat Sink with Different Flow Arrangements
International Heat Transfer Conference 15, Vol.23, 2014, issue
Olayinka Omowunmi Adewumi, Josua Petrus Meyer, Tunde Bello-Ochende