ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Computational Thermal Sciences: An International Journal
ESCI SJR: 0.249 SNIP: 0.434 CiteScore™: 0.7

ISSN 印刷: 1940-2503
ISSN オンライン: 1940-2554

Computational Thermal Sciences: An International Journal

DOI: 10.1615/ComputThermalScien.v1.i1.10
pages 1-35

THERMAL RADIATION MODELING IN NUMERICAL SIMULATION OF MELT-COOLANT INTERACTION

Leonid A. Dombrovsky
Joint Institute for High Temperatures, 17A Krasnokazarmennaya Str., Moscow, 111116, Russia; Tyumen State University, 6 Volodarsky Str., Tyumen, 625003, Russia
National Committee of Heat and Mass Transfer (NCHMT)
M. V. Davydov
Electrogorsk Research & Engineering Center on NPP Safety, Saint Constantine 6,142530, Electrogorsk, Moscow region, Russia
P. Kudinov
Division of Nuclear Power Safety, Royal Institute of Technology (KTH), Roslagstullbacken 21, Alba Nova, Stockholm 10691, Sweden

要約

This paper is concerned with radiation heat transfer modeling in multiphase disperse systems, which are formed in high-temperature melt-coolant interactions. This problem is important for complex interaction of the core melt with water in the case of a hypothetical severe accident in light-water nuclear reactors. The nonlocal effects of thermal radiation due to the semitransparency of water in the visible and near-infrared spectral ranges are taken into account by use of the recently developed large-cell radiation model (LCRM) based on the spectral radiation energy balance for single computational cells. In contrast to the local approach for radiative heating of water by particles (OMM—opaque medium model), the LCRM includes radiative heat transfer between the particles of different temperatures. The regular integrated code VAPEX-P, intended to model the premixing stage of FCI, was employed for verification of the LCRM in a realistic range of the problem parameters. A comparison with the OMM and the more accurate P1 approximation showed that the LCRM can be recommended for the engineering problem under consideration. The effects of the temperature difference in solidifying particles are analyzed by use of the recently suggested approximation of transient temperature profile in the particles. It is shown that the effect of the temperature difference on heat transfer from corium particles to ambient water is considerable and should not be ignored in the calculations. An advanced computational model based on the LCRM for the radiation source function and subsequent integration of radiative transfer equation along the rays is also discussed.


Articles with similar content:

THERMAL RADIATION MODELING IN NUMERICAL SIMULATION OF MELT-COOLANT INTERACTION
ICHMT DIGITAL LIBRARY ONLINE, Vol.13, 2008, issue
M. V. Davydov, P. Kudinov, Leonid A. Dombrovsky
COMPUTATION OF MULTI-MODE HEAT TRANSFER WITH INTERNAL RADIATION AND PHASE CHANGE
ICHMT DIGITAL LIBRARY ONLINE, Vol.4, 2001, issue
J. Y. Murthy, Sanjay R. Mathur
On the Natural Circulating PWR U-Tube Steam Generators—Experiments and Analysis
ICHMT DIGITAL LIBRARY ONLINE, Vol.19, 1981, issue
S. P. Kalra
DETAILED SPECTRAL RADIATION CALCULATIONS FOR NONHOMOGENEOUS SOOT/GAS MIXTURES BASED ON A SIMULATED ETHYLENE JET DIFFUSION FLAME
ICHMT DIGITAL LIBRARY ONLINE, Vol.7, 1995, issue
Pei-Feng Hsu, Jerry C. Ku
SIMULATION OF RADIATIVE HEAT TRANSFER IN A FLUIDIZED BED SOLAR RECEIVER BY MONTE CARLO METHOD
ICHMT DIGITAL LIBRARY ONLINE, Vol.13, 2008, issue
Jean-Jacques Bezian, Mouna El Hafi, Arezki Bounaceur, Nicolas Meilhac