ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Computational Thermal Sciences: An International Journal
ESCI SJR: 0.244 SNIP: 0.434 CiteScore™: 0.7

ISSN 印刷: 1940-2503
ISSN オンライン: 1940-2554

Computational Thermal Sciences: An International Journal

DOI: 10.1615/ComputThermalScien.2014007841
pages 13-26

A FIXED-GRID BASED MIXTURE MODEL FOR PULSED LASER PHASE CHANGE PROCESS

Satya Prakash Kar
School of Mechanical Sciences, Indian Institute of Technology Bhubaneswar, Odisha-751 013, India
Prasanjeet Rath
School of Mechanical Sciences, Indian Institute of Technology Bhubaneswar, Odisha-751 013, India

要約

A two-dimensional, transient, axisymmetric model is developed to study the transport phenomena in a laser melting problem under a single laser pulse as well as repetitive laser pulse. The model is based on one-phase continuum mixture theory and fixed-grid technique. The model incorporates natural convection in the melt pool and radiation and convection heat losses from the irradiated surface. The complicated phase front evolution is captured implicitly by calculating the liquid volume fraction based on latent heat content at each control volume. An iterative update procedure is developed to update the liquid volume fraction at each control volume. A comparative study between the effect of natural convection and diffusion on the position and shape of the solid-liquid interface is made. It is found that natural convection does not play any significant role under the present condition in deciding the width and depth of the melt pool. The melt depth and melt radius predicted using the proposed model is compared with the available results and a good agreement is found. The model is further explored to investigate the effect of natural convection on the position and shape of the molten pool under the repetitive laser pulse.


Articles with similar content:

Modeling of the Thermal State of the Diesel Cylinder Cover with Allowance for Liquid Flow in the Cooling Cavity
Heat Transfer Research, Vol.39, 2008, issue 8
L. L. Myagkov, N. S. Malastovskii, E. E. Strizhov
EXPERIMENTAL RESULTS OF TWO-DIMENSIONAL INWARD SOLIDIFICATION
International Heat Transfer Conference 6, Vol.3, 1978, issue
J. S. Goodling, G. S. Patel, M. S. Khader
TOMOGRAPHIC RECONSTRUCTION OF ASYMMETRIC SPRAYS FROM A TWIN-HOLE AIR SHROUD INJECTOR
Atomization and Sprays, Vol.7, 1997, issue 2
Changhyuk Lee, Suk Ho Chung
SENSITIVITY ON THE HEAT FLUX SHAPE OF THERMO-CAPILLARY CONVECTION IN SIDE-HEATED LIQUID BRIDGE: PRELIMINARY RESULTS
ICHMT DIGITAL LIBRARY ONLINE, Vol.4, 2001, issue
H. Beji, G. Labrosse
ON THE PROCESS OF BUBBLE GROWING AND DEPARTURE ON HYDROPHILIC, SUPERHYDROPHOBIC AND BIPHILIC SURFACES
International Heat Transfer Conference 16, Vol.4, 2018, issue
Emanuele Teodori, Pedro Pontes, Antonio L. N. Moreira, Ana S. Moita