ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.262 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2012004212
pages 673-686

CORRELATIONS FOR PENETRATION HEIGHT OF SINGLE AND DOUBLE LIQUID JETS IN CROSS FLOW UNDER HIGH-TEMPERATURE CONDITIONS

Hyun Jin Yoon
Department of Mechanical Engineering, Kyungpook National University, 1370 Sankyuk-dong Buk-gu, Daegu, Republic of Korea
Jung Goo Hong
Department of Mechanical Engineering, Kyungpook National University, 80 Daehak-ro Buk-gu, Daegu, Republic of Korea
Choong-Won Lee
Department of Mechanical Engineering, Kyungpook National University,1370 Sankyuk-dong Buk-gu, Daegu, Republic of Korea

要約

In previous researches on a jet in cross flow (JICF), which is applied for the liquid jet injection system of air-breathing propulsion systems or rocket engine systems, more than 20 different correlations of jet penetration have been proposed. In these proposed correlations, the relationships between jet penetration and the various flow parameters (momentum flux ratio, Reynolds number, Weber number, viscosity ratio, etc.) were defined. But most of these studies were carried out using the single orifice injector (SOI). In this study, in order to define the interference effects of liquid jet penetration in cross flow, the double orifice injector (DOI) is adopted. First, the jet penetration correlation of the SOI according to the cross-flow temperature controlled by the vitiated air heater is proposed. The jet penetration height for heated cross flow is lower than that for cold cross flow because of the increase of cross-flow velocity despite the lower density. The jet penetration correlation of the DOI is derived for variations of injector orifice spacing. In the case of the DOI, since the front liquid jet acts as a shield of the rear liquid jet, the jet penetration with the DOI is higher than that with the SOI. With the double DOI, the rear jet penetration height is increased as the nozzle spacing is decreased. The penetration height correlation for the rear liquid jet with the DOI was developed. As the nozzle spacing increases, the jet penetration height decreases; therefore, an inverse relationship between nozzle spacing and jet penetration height is expected.


Articles with similar content:

LIQUID JET TRAJECTORY IN A SUBSONIC GASEOUS CROSS-FLOW: AN ANALYSIS OF PUBLISHED CORRELATIONS
Atomization and Sprays, Vol.26, 2016, issue 11
Mohsen Broumand , Meng Wang, Madjid Birouk
COMPUTATIONAL INVESTIGATION AND OPTIMIZATION OF HEAT TRANSFER ENHANCEMENT THROUGH PERFORATED PIN FINS OF DIFFERENT DIMENSIONS
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Promod Kumar Patowari, Ambarish Maji, Dipankar Bhanja
Heat Transfer Enhancement for Row of Impinging Jets in Cross-Flow with Some Baffle Attachments
International Heat Transfer Conference 15, Vol.25, 2014, issue
Chayut Nuntadusit, Passakorn Vessakosol, Makatar Wae-hayee, Rattanakorn Pansang
EXPERIMENTAL EVALUATION OF JET IMPINGEMENT COOLING FOR APPLICATION IN POWER PLANTS CONDENSERS
Second Thermal and Fluids Engineering Conference, Vol.35, 2017, issue
Abdulmohsen O. Alsaiari, Thomas E. Diller
CRITICAL EVALUATION OF MOMENTUM FLUX RATIO RELATIVE TO A LIQUID JET IN CROSSFLOW
Atomization and Sprays, Vol.28, 2018, issue 7
Scott Samuelsen, Scott B. Leask, Vincent McDonell