ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.737 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 30, 2020 巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2017018229
pages 477-491

INVESTIGATION ON THE INTERACTION AMONG MULTI-SPRAYS GENERATED FROM PRESSURE-SWIRL ATOMIZERS

Zekun Zheng
Collaborative Innovation Center of Advanced Aero-Engines, National Key Laboratory of Science and Technology on Aero-Engines, School of Energy and Power Engineering, Beihang University, Beijing 100191, People's Republic of China
Yong Huang
Collaborative Innovation Center of Advanced Aero-Engines, National Key Laboratory of Science and Technology on Aero-Engines, School of Energy and Power Engineering, Beihang University, Beijing 100191, People's Republic of China

要約

The spatial distributions of the Sauter mean diameter (SMD) and the size distribution parameter n in the three-spray including left, center, and right were investigated experimentally in this paper. The observed SMD of the center spray is larger than that of the single spray after the center penetration point (CPP) due to the penetration of the side sprays. However, they tend to be equal far away from the nozzle exit. Downstream of the CCP for the side spray, the SMD increases along the axial direction. At first the SMD of the side spray is larger than that of the single spray but less than that of the center spray. Then with the increase in axial distance, the SMD of the side spray will exceed that of both the center spray and the single spray due to the penetration of the other side spray. Downstream of the initial interference point (IIP), the observed SMD of the integrated spray is less than that of the single spray due to the droplet collision. Near the IIP, the droplets prefer to break up and bounce, but near the CPP, the intrusive large droplets and local small droplets prefer to aggregate into larger droplets. There are two primary mechanisms to affect the local SMD. One is the spatial superposition of the spray from different atomizers, and the other is the droplet collision, although the former mechanism is dominant.


Articles with similar content:

SPRAY CHARACTERISTICS OF A FLOW-BLURRING ATOMIZER
Atomization and Sprays, Vol.20, 2010, issue 9
Ajay Agrawal, Benjamin M. Simmons
VISUALIZATION OF AIRFLOW AROUND A SINGLE DROPLET DEFORMED IN AN AIRSTREAM
Atomization and Sprays, Vol.19, 2009, issue 7
Takao Inamura, Takaaki Kawada, Hideki Yanaoka
CHARACTERISTICS OF AN ACOUSTICALLY MODULATED SPRAY ISSUED FROM CIRCULAR AND ELLIPTICAL ORIFICE NOZZLES
Atomization and Sprays, Vol.16, 2006, issue 3
Sumanta Acharya, T. Messina
THE STRUCTURE OF AN ACOUSTICALLY FORCED, DROPLET-LADEN JET
Atomization and Sprays, Vol.7, 1997, issue 6
Tait R. Swanson, Cill D. Richards
ATOMIZATION CHARACTERISTICS OF AN ANNULAR LIQUID SHEET WITH INNER AND OUTER GAS FLOWS
Atomization and Sprays, Vol.24, 2014, issue 12
Nicolas Leboucher, Francis Roger, Jean-Louis Carreau