ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.262 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2017019096
pages 569-578

A STUDY ON DISCHARGE COEFFICIENTS OF CLOSED-TYPE SWIRL INJECTORS FOR A LIQUID ROCKET ENGINE

Kyubok Ahn
School of Mechanical Engineering, Chungbuk National University, Chungbuk, Korea
Hwan-Seok Choi
Combustion Chamber Department, Korea Aerospace Research Institute, Daejeon, Korea

要約

An experimental and comparative study on the discharge coefficients of closed-type swirl injectors, which have a swirl chamber diameter larger than the nozzle diameter, has been performed. With a range of geometric dimensions and therefore broad swirl injector geometric constants, 27 closed-type swirl injectors were designed and manufactured. Hydraulic cold-flow tests were conducted using tap water to measure the discharge coefficients, with pressure differentials through the injectors ranging from approximately 8 to 12 bar. The discharge coefficients obtained from the cold-flow tests were confirmed to follow a functional relationship to the swirl injector geometric constant. A novel simple empirical equation, which would be useful in the design of new closed-type swirl injectors for liquid rocket engines, is suggested. The present experimental results were compared with previous empirical equations to investigate their accuracy. It was found that most equations predicted well the measured discharge coefficients only in a narrow range of swirl injector geometric constants; on the contrary, an equation suggested by Russian researchers could anticipate those with great accuracy in a whole range of present swirl injector geometric constants.


Articles with similar content:

AN EXTENSIVE STUDY ON THE DISCHARGE COEFFICIENTS OF OPEN-TYPE SWIRL INJECTORS
Atomization and Sprays, Vol.27, 2017, issue 10
Kyubok Ahn, Hwan-Seok Choi
AN EXPERIMENT STUDY ON PHENOMENON AND MECHANISM OF FLASH BOILING SPRAY FROM A MULTI-HOLE GASOLINE DIRECT INJECTOR
Atomization and Sprays, Vol.23, 2013, issue 5
Shenghua Yang, Zhiping Song, Zhuo Yao, Tianyou Wang
IMPROVED SEMI-EMIPIRICAL PREDICTION OF VISCOUS SPRAY CONE ANGLE FOR PRESSURE SWIRL ATOMIZERS
Atomization and Sprays, Vol.27, 2017, issue 9
Zhilin Liu, Yong Huang, Lei Sun
THE EFFECT OF MANIFOLD CROSS-FLOW ON THE DISCHARGE COEFFICIENT OF SHARP-EDGED ORIFICES
Atomization and Sprays, Vol.9, 1999, issue 1
Douglas Talley, P. A. Strakey
DEVELOPMENT AND APPLICATION OF IMAGING SYSTEM TO EVALUATE LIQUID AND VAPOR ENVELOPES OF MULTI-HOLE GASOLINE FUEL INJECTOR SPRAYS UNDER ENGINE-LIKE CONDITIONS
Atomization and Sprays, Vol.22, 2012, issue 8
Scott E. Parrish, R. J. Zink