ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.189 5年インパクトファクター: 1.596 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v11.i4.100
pages 471-490

QUANTITATIVE MEASUREMENTS OF DIESEL FUEL SPRAY CHARACTERISTICS IN THE NEAR-NOZZLE REGION USING X-RAY ABSORPTION

Yong Yue
Argonne National Laboratory, Argonne, Illinois, USA
Christopher F. Powell
Energy Systems Division, Argonne National Laboratory, Argonne, Illinois 60439 USA
Ramesh Poola
Argonne National Laboratory, Argonne, Illinois, USA
Jinn-Chyi Wang
Department of Food Science and Technology, Tajen University, Pingtung, Taiwan
Johannes K. Schaller
Robert Bosch GmbH, Stuttgart, Germany

要約

The mass distribution of diesel fuel sprays close to the nozzle has been determined by using absorption techniques with a monochromatic, synchrotron X-ray beam. The measurements were highly quantitative, with a temporal resolution better than 1 ms. The radial mass distribution of the fuel can be well described by a Gaussian distribution near the nozzle. The calculated volume fraction of the fuel indicates that the so-called liquid core near the nozzle did not exist under the test conditions examined (20–80 MPa injection pressure, 0.3–0.6 ms injection duration). Rather, the bulk of the spray was composed of a liquid/gas mixture with liquid content not exceeding 50% by volume. The maximum-density region was found at the front edge of the sprays, where the fuel volume fraction can reach 80%, and was limited to a thin layer (1–2 mm) perpendicular to the spray axis. The penetration of the front edge was found to be nonlinear with respect to injection duration within 20 mm from the nozzle.


Articles with similar content:

SPRAY VISUALIZATION AND HYDRAULIC CHARACTERIZATION OF THE HOLES OF A FIVE-HOLE, VALVE-COVERED-ORIFICE NOZZLE OF AN ELECTRONICALLY CONTROLLED DIESEL INJECTOR
Atomization and Sprays, Vol.6, 1996, issue 3
D. Laforgia, V. Damiani, R. Campanella
DIESEL FUEL SPRAY DROPLET SIZES AND VOLUME FRACTIONS FROM THE REGION 25 MM BELOW THE ORIFICE
Atomization and Sprays, Vol.13, 2003, issue 5&6
Terry Parker, Jennifer Labs
LASER BASED QUANTITATIVE IMAGING OF AIR ENTRAINMENT INTO EVAPORATING DIESEL SPRAY
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
Keiya Nishida, H. Hiroyasu, M. Suzuki
DIESEL FUEL SPRAY DROPLET SIZES AND VOLUME FRACTIONS FROM THE REGION 25 MM BELOW THE ORIFICE
Atomization and Sprays, Vol.13, 2003, issue 1
Terry Parker, Jennifer Labs
SIMULATION OF CRYO-ABLATION OF THE PROSTATE BY 1, 2 AND 3 EMBEDDED CRYO-SURGICAL PROBES
International Heat Transfer Conference 13, Vol.0, 2006, issue
David Degani, Z. Magalov