ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.189 5年インパクトファクター: 1.596 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v11.i4.50
pages 365-396

ATOMIZATION, COMBUSTION, AND CONTROL OF CHARGED HYDROCARBON SPRAYS

John S. Shrimpton
Energy Technology Research Group, School of Engineering Sciences, University of Southampton, United Kingdom, SO171BJ

要約

The atomization of electrically insulating liquid fuels has been investigated using the charge injection method with consideration of its usefulness as a spray combustion technique. This requires electrostatic spraying systems that atomize unadulterated commercial grades of fuel oil sufficiently finely while being able to operate robustly in the ionized combustion environment. As a natural consequence of the liquid charging mechanism, the atomization quality improves with flow rate because of the dual action of aerodynamic shear and the higher specific charge that can be achieved in the liquid jet. At moderate charging conditions, sprays of insulating liquids are similar to those of semiconducting liquids, with a core of larger drops surrounded by a sheath of much smaller companions. More highly charged sprays are more homogeneous, and stable combustion of kerosene and diesel oil has been achieved for the first time at practically useful flow rates. Flame stability improves with atomization quality and a stable flame seat is formed without the need for a pilot flame for an atomizer of 150-mm orifice diameter for a kerosene flow rate of 0.5 ml/s and a specific charge of 3.0 C/m3. Spray manipulation of both cold and combusting sprays using DC electric fields has been demonstrated, and the effectiveness of the technique suggests that optimization of the combustion process is possible by applying AC electric fields.


Articles with similar content:

PRIMARY ATOMIZATION AND DROP SIZE CHARACTERISTICS OF AN ELECTROSTATIC DIELECTRIC LIQUID PULSED ATOMIZER
Atomization and Sprays, Vol.22, 2012, issue 4
Agissilaos Kourmatzis, John S. Shrimpton
ELECTROHYDRODYNAMICS OF CHARGE INJECTION ATOMIZATION: REGIMES AND FUNDAMENTAL LIMITS
Atomization and Sprays, Vol.13, 2003, issue 2&3
John S. Shrimpton
DISCHARGE COEFFICIENTS FOR PLAIN-ORIFICE EFFERVESCENT ATOMIZERS
Atomization and Sprays, Vol.4, 1994, issue 3
Arthur H. Lefebvre, S. Kevin Chen
LOCALLY RESOLVED INVESTIGATION OF THE VAPORIZATION OF GDI SPRAYS APPLYING DIFFERENT LASER TECHNIQUES
Atomization and Sprays, Vol.16, 2006, issue 3
Ingo Schmitz, Frank Beyrau, Alfred Leipertz, Thomas Seeger, Markus Christian Weikl
ON-LINE TEMPERATURE MEASUREMENT IN A PLASMA REACTOR FOR FULLERENE SYNTHESIS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.7, 2003, issue 1
Gilles Flamant, Frederic Fabry, J. Gonzales Aguilar, J. M. Badie, T. M. Gruenberger, L. Fulcheri, Stephane Abanades