ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.189 5年インパクトファクター: 1.596 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v11.i4.90
pages 453-470

ON THE PREDICTION AND STRUCTURES OF WIDE-ANGLE FULL-CONE LIQUID SPRAYS

S. J. Walmsley
Atomization and Sprays Research Group, Department of Mechanical Engineering, University of anchester Institute of Science and Technology, Manchester, U.K.

要約

This article describes the modification, use, and validation of a three-dimensional computational fluid dynamics (CFD) code applied to model solid-cone sprays produced by pressure-swirl atomizers. The finite-volume code used is a three-dimensional, orthogonal, two-phase, Lagrangian-tracking, transient code. It contains submodels for the secondary breakup of droplets and for collisions. The effect of the chosen initial drop size distribution on the predicted fully developed spray characteristics is investigated. The optimum initial conditions are determined by making comparisons with published experimental data. It is found that to obtain a realistic model, a range of drop sizes needs to be introduced. This range can be represented by a truncated Rosin-Rammler distribution discretized into 20 size classes. Each initial distribution can be characterized by the maximum, minimum, and Rosin-Rammler mean diameters. Relations are developed for these diameters as a function of the operating parameters. This work demonstrates that, to model a solid-cone spray accurately, the microscopic processes occurring within it, such as secondary breakup, need to be accounted for.


Articles with similar content:

SIMULATION OF WATER AND OTHER NON-FUEL SPRAYS USING A NEW SPRAY MODEL
Atomization and Sprays, Vol.13, 2003, issue 1
James C. Beck, A. Paul Watkins
CHARACTERIZATION OF TRAJECTORY, BREAK POINT, AND BREAK POINT DYNAMICS OF A PLAIN LIQUID JET IN A CROSSFLOW
Atomization and Sprays, Vol.21, 2011, issue 3
Vincent G. McDonell, U. M. Mondragon, Q. Wang, C. T. Brown
Theoretical Determination of Spray Drop Size Distributions
Part 2: Applications

International Journal of Fluid Mechanics Research, Vol.24, 1997, issue 4-6
Jean Cousin, Christophe Dumouchel
A DISCUSSION ON THE STOCHASTIC MODELING OF SPRAY FLOWS
Atomization and Sprays, Vol.19, 2009, issue 12
Mark R. Archambault
THE PERFORMANCE CHARACTERISTICS OF SOLID-CONE-SPRAY PRESSURE-SWIRL ATOMIZERS
Atomization and Sprays, Vol.10, 2000, issue 6
D. D. James, J. R. Jeong, R. A. Sharief