ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.262 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2015011356
pages 93-119

VISUALIZATION OF CAVITATING FLOW WITHIN A HIGH-ASPECT-RATIO SLOT INJECTOR

Andrew S. Thompson
Maurice J. Zucrow Laboratories, Department of Aeronautics and Astronautics, Purdue University, West Lafayette, Indiana 47906, USA
Stephen D. Heister
Maurice J. Zucrow Laboratories, Department of Aeronautics and Astronautics, Purdue University, West Lafayette, Indiana, USA

要約

Cavitation inside the passages of an injector can result in decreased discharge characteristics. This paper describes a flow visualization study to characterize cavitation structures in the flow of methanol through a series of high aspect ratio slot orifice injectors of varying L/DH. Cavitation structures were observed to evolve through a series of regimes corresponding to increased pressure drop across the injector. Specifically, the cavitation region lengthens as pressure drop increases. The lengthening cavitation results in a decrease in discharge coefficient that follows a predictable pattern. As the cavitaton lengthens to occupy the length of the injector and hydraulic flip occurs, the discharge coefficient drops suddenly away from what is predicted. In the cavitating injector other flow structures are observed and described. Also, high speed videos are analyzed for frequency content through the cavitation region. Frequency content appears to be concentrated below 1 kHz, with the majority of content existing below 200 Hz.


Articles with similar content:

FLOW PATTERN OBSERVATIONS OF GASOLINE DISSOLVED CO2 INSIDE AN INJECTOR
Atomization and Sprays, Vol.16, 2006, issue 6
A. Rashkovan, Eran Sher
Flow and Performance Characteristics of S-Shaped Diffusers
International Journal of Fluid Mechanics Research, Vol.37, 2010, issue 6
Prasad Vijay Padwad, Mukka Govardhan
EFFECT OF NOZZLE CONFIGURATION ON MACROSCOPIC SPRAY CHARACTERISTICS OF MULTI-HOLE FUEL INJECTORS UNDER SUPERHEATED CONDITIONS
Atomization and Sprays, Vol.26, 2016, issue 5
Gele Aori, Ming Zhang, David L. S. Hung, Tianyun Li, Gaomimg Zhang
EXPERIMENTAL AND NUMERICAL STUDIES ON SPRAY CHARACTERISTICS OF AN INTERNAL OSCILLATING NOZZLE
Atomization and Sprays, Vol.29, 2019, issue 1
Wenbo Zhao, Wei Xie, Zhijun Wu, Liguang Li, Zongjie Hu, Jiachen Zhai, Yufeng Wang
A COMPARISON OF DIESEL AND JATROPHA METHYL ESTER (JME) SPRAY CHARACTERISTICS: EFFECT OF NOZZLE ENTRY RADIUS
Atomization and Sprays, Vol.26, 2016, issue 10
R. V. Ravikrishna, Prasad Boggavarapu