ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.737 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 30, 2020 巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v15.i6.30
pages 661-686

CONTROL OF SPRAY FORMATION BY VIBRATIONAL EXCITATION OF FLAT-FAN AND CONICAL LIQUID SHEETS

Günter Brenn
Institute of Fluid Mechanics and Heat Transfer, Graz University of Technology, 8010 Graz, Austria
Zeljko Prebeg
Institute of Chemical and Bioengineering, LSTM, University of Erlangen-Nurnberg, 91058 Erlangen, Germany
Dirk Rensink
Institute of Chemical and Bioengineering, LSTM, University of Erlangen-Nurnberg, 91058 Erlangen, Germany
Alexander L. Yarin
Faculty of Mechanical Engineering, Technion-Israel Institute of Technology, Haifa 32000, Israel

要約

In the present work, we develop a technique for controlling spray formation by vibrational excitation of liquid sheets. The sheets are formed by commercial prefilming pressure atomizers or by a specially designed liquid sheet generator. The excitation controls the drop formation such that narrow drop size spectra are produced. For realizing the technique, a vibrator for moving the atomizers was developed. Investigations with flat-fan atomizers show that, for sufficiently small sheet Weber number, regular-shaped waves on the sheets are formed by the excitation, which results in the formation of regular-shaped ligaments. The latter disintegrate into droplets by the Rayleigh mechanism. The small Weber number keeps the influence of the Kelvin-Helmholtz instability of the sheet (which would disturb the regularity of the drop formation) small. For investigating the controlled breakup of conical sheets, a conical sheet generator was developed, which allows the sheet thickness at the orifice to be varied. Investigations of open water bells show that the excitation may force the formation of regular sprays for this sheet geometry, also. The breakup of the conical sheets is also controlled by preshaping of the sheets due to the nozzle vibrations. For both sheet geometries, our work quantifies the achievable drop sizes and operation windows of the influencing parameters in nondimensional form, inside which the technique can be applied.


Articles with similar content:

EXPERIMENTAL STUDY OF PRIMARY ATOMIZATION IN TRIPLE CO-PLANAR AND NON-PLANAR IMPINGING JETS
Atomization and Sprays, Vol.29, 2019, issue 11
S. Kazemi, Azadeh Kebriaee
BREAKUP OF DROPLETS OF NEWTONIAN AND NON-NEWTONIAN FLUIDS
Atomization and Sprays, Vol.6, 1996, issue 3
D. S. Whitelaw, Jim H. Whitelaw, C. Arcoumanis
EFFECT OF NOZZLE GEOMETRY ON THE ATOMIZATION AND SPRAY CHARACTERISTICS OF GELLED-PROPELLANT SIMULANTS FORMED BY TWO IMPINGING JETS
Atomization and Sprays, Vol.20, 2010, issue 12
Jong Guen Lee, Syed Fakhri, Richard A. Yetter
DROP SIZE MODIFICATION IN BLACK LIQUOR SPRAYS FROM COMMERCIAL NOZZLES USING PULSED FLOW
Atomization and Sprays, Vol.7, 1997, issue 5
Steven J. Lien, Wenrui Yang, H. Jeff Empie
Characteristics of the Internal Flow in a Diesel Injection Nozzle
International Journal of Fluid Mechanics Research, Vol.24, 1997, issue 1-3
Keiya Nishida, Hiroyuki Hiroyasu, J. H. Kim