ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.262 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v10.i2.40
20 pages

CHARACTERIZATION OF PROTOTYPE HIGH-PRESSURE SWIRL INJECTOR NOZZLES, PART I: PROTOTYPE DEVELOPMENT AND INITIAL CHARACTERIZATION OF SPRAYS

Changsoo Jang
Department of Mechanical Engineering, KAIST, Taejon, Korea
Choongsik Bae
Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, 373-1, Gusong-dong, Yuseong-gu, Daejon, 305-701, Republic of Korea
Sangmin Choi
Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Yusong-gu, Taejon, Korea

要約

Basic characteristics of prototype intermittent swirl-generating nozzles for gasoline direct injection were investigated. These prototype swirl nozzles were fabricated by modifying commercial multipoint injection (MPI) nozzles to operate at higher pressures. Experimental parameters included injection pressure, injection duration, and ambient pressure. Spray tip penetration and atomization performance were examined as a function of these parameters. Droplet mean diameter, D32, of the swirl nozzle ranged from 20 to 28 μm at an injection pressure of 5 MPa, which was about 30% smaller than that of the base MPI nozzles. Atomization characteristic was closely related to the overall velocity of the injected droplet cloud, ambient air density, and cone angle. Drop size distributions were found to fit to a Rosin-Rammler distribution and to be less dispersed than those of the air-assisted fuel injector.


Articles with similar content:

EXPERIMENTAL INVESTIGATION OF SPRAY CHARACTERISTICS OF DIESEL-METHANOL-WATER EMULSION
Atomization and Sprays, Vol.25, 2015, issue 8
Wuqiang Wang, Shenteng Cao, Dongyin Wu, Junjie Yan, Zhenzhou Pang
AN EXPERIMENTAL AND ANALYTICAL STUDY OF THE SPRAY CHARACTERISTICS OF AN INTERMITTENT AIR-ASSISTED FUEL INJECTOR
Atomization and Sprays, Vol.10, 2000, issue 2
Sangmin Choi, Changsoo Jang, Sung-Soo Kim
EFFECT OF THE LIQUID INJECTION ANGLE ON THE ATOMIZATION OF LIQUID JETS IN SUBSONIC CROSSFLOWS
Atomization and Sprays, Vol.24, 2014, issue 1
H. Almeida, J. M. M. Sousa, Mário Costa
SPRAY STRUCTURE FROM DOUBLE FUEL INJECTION IN MULTIHOLE INJECTORS FOR GASOLINE DIRECT-INJECTION ENGINES
Atomization and Sprays, Vol.19, 2009, issue 6
Nicholas Mitroglou, J. M. Nouri, C. Arcoumanis
SPRAY CHARACTERISTICS OF A PRESSURE-SWIRL FUEL INJECTOR SUBJECTED TO A CROSSFLOW AND A COFLOW
Atomization and Sprays, Vol.21, 2011, issue 8
Barry Kiel, Ryan G. Batchelor, Amy Lynch, Mark Reeder, James Gord, Joseph Miller