ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.262 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v17.i6.30
pages 529-550

INTERNAL AND NEAR-NOZZLE FLOW OF A PRESSURE-SWIRL ATOMIZER UNDER VARIED FUEL TEMPERATURE

Seoksu Moon
Department of Mechanical Engineering, Inha University
Choongsik Bae
Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, 373-1, Gusong-dong, Yuseong-gu, Daejon, 305-701, Republic of Korea
Essam Abo-Serie
Jaejoon Choi
Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Daejeon, Korea

要約

Gasoline fuel spray from a swirl injector collapses at high fuel temperatures due to the flash boiling effect. In order to clarify the influence of fuel temperature on the spray structure, a variety of internal and near-nozzle flows were examined at different fuel temperatures. The initial development of fuel flows was analyzed by imaging the spray behavior with high-magnification optics and by static pressure measurements of the spray field with a piezoresistive transducer. The experimental results are discussed with a mathematical liquid film model. Fuel evaporation at high fuel temperatures causes static gas pressure to increase inside and near the nozzle. The reduced viscosity of fuel at high temperature causes enhanced swirl motion of the spray. These lead to reduced liquid film thickness inside the nozzle, in addition to increased flow divergence at the nozzle exit. At locations further downstream, the spray is driven toward the spray axis at high fuel temperatures as a result of the augmented pressure drop inside the spray and entrained air. The shorter breakup time at high fuel temperatures makes the spray lose its initial momentum and be easily affected by the pressure difference between the inner and outer parts of the spray and entrained air.


Articles with similar content:

LIQUID AND VAPOR SPRAY STRUCTURE IN HIGH-PRESSURE COMMON RAIL DIESEL INJECTION
Atomization and Sprays, Vol.11, 2001, issue 5
Gilles Bruneaux
GEOMETRIC EFFECT ON SPRAY CHARACTERISTICS OF GAS-CENTERED SWIRL COAXIAL INJECTORS: RECESS RATIO AND GAP THICKNESS
Atomization and Sprays, Vol.27, 2017, issue 7
Jungho Lee, Chae Hoon Sohn, Youngbin Yoon, Ingyu Lee, Gujoeng Park
EXPERIMENTAL STUDY OF SPRAY BREAKUP PHENOMENA IN SMALL-SCALE SIMPLEX ATOMIZERS WITH AND WITHOUT AIR SWIRL
Atomization and Sprays, Vol.28, 2018, issue 4
Muralidhara Suryanarayana Rao, Srinivasan Kothandaraman, Muthuselvan Govindaraj, Kushal D. Ghate, Venkat S. Iyengar, Sundararajan Thirumalachari
MACROSCOPIC CHARACTERIZATION OF FLASH-BOILING MULTI-HOLE SPRAYS USING PLANAR LASER INDUCED EXCIPLEX FLUORESCENCE TECHNIQUE. PART I. ON-AXIS SPRAY STRUCTURE
Atomization and Sprays, Vol.22, 2012, issue 10
David J. Cleary, Ming Zhang, Yuyin Zhang, Min Xu, Gaomimg Zhang
EFFECTS OF NOZZLE PRESSURE WAVEFORMS ON INTERMITTENT SPRAYS
Atomization and Sprays, Vol.8, 1998, issue 4
V. F. Cook, Sung P. Lin