ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.262 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2015011589
pages 695-714

EFFECT OF ELASTICITY OF BOGER FLUIDS ON THE ATOMIZATION BEHAVIOR OF AN IMPINGING JET INJECTOR

Michele Negri
DLR− German Aerospace Center, Institute of Space Propulsion Lampoldshausen, Langer Grund, 74239 Hardthausen, Germany
Helmut K. Ciezki
German Aerospace Center (DLR), Institute of Space Propulsion, 74239 Hardthausen, Germany

要約

Gelled propellants are of interest for rocket and ramjet propulsion systems because of their safety and performance benefits. During spray tests with doublets, such as on impinging jet injectors, it was observed that the breakup of the fluid sheet of several gels did not lead to the formation of droplets; instead, threadlike structures were formed. Such structures may cause a reduction in combustion efficiency and the accumulation of unburned material in the combustion chamber. The goal of the work presented here is to determine which physical properties influence thread formation. Spray tests were conducted with Boger fluids under atmospheric conditions concerning pressure and temperature with a like-on-like impinging jet injector. The range of injection velocities from 5 to over 70 m/s was studied. Images of the sprays were obtained with a shadowgraph technique. In order to obtain quantitative results from shadowgraph images, a code was implemented to determine a characteristic dimension of the threads. A clear correlation between the relaxation time, which is an indicator of the intensity of elastic effects, and the dimension of the obtained threads was observed. These results suggest that thread formation is caused by nonlinear elastic effects, while shear viscosity and surface tension do not seem to influence the formation of these structures.


Articles with similar content:

EFFECT OF ADJUVANTS ON ATOMIZATION OF PESTICIDES
Atomization and Sprays, Vol.14, 2004, issue 6
Paul Van der Meeren, Pieter Spanoghe, Hilde Van Eeckout, Walter Steurbaut
SHEET ATOMIZATION OF NON-NEWTONIAN LIQUIDS
Atomization and Sprays, Vol.13, 2003, issue 2&3
Thomas J. Hartranft, Gary S. Settles
ANALYZING THE CYCLE-TO-CYCLE VARIATIONS OF PULSING SPRAY CHARACTERISTICS BY MEANS OF THE PROPER ORTHOGONAL DECOMPOSITION
Atomization and Sprays, Vol.23, 2013, issue 7
Min Xu, Jie Zhong, David L. S. Hung, Hao Chen
GASOLINE SPRAYS INJECTED AT DIFFERENT BACK PRESSURES: CALCULATIONS USING TWO ATOMIZATION MODELS
Atomization and Sprays, Vol.17, 2007, issue 3
Salah S. Ibrahim, Graham Wigley, N. B. H. Abdelkarim, Assaad Masri
DEVELOPMENT OF MICRO-DIESEL INJECTOR NOZZLES VIA MEMS TECHNOLOGY AND EFFECTS ON SPRAY CHARACTERISTICS
Atomization and Sprays, Vol.13, 2003, issue 5&6
Michael L. Corradini, Seunghyun Baik, James P Blanchard