ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.262 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v15.i3.30
pages 295-322

MODELING THE INITIAL DROPLET SIZE DISTRIBUTION IN SPRAYS BASED ON THE MAXIMIZATION OF ENTROPY GENERATION

Xianguo Li
University of Waterloo
Meishen Li
Department of Mechanical Engineering, University of Waterloo, Waterloo, Ontario, Canada N2L 3G1
Huijuan Fu
Department of Mechanical Engineering, University of Waterloo, Waterloo, Ontario, Canada N2L 3G1

要約

The maximum entropy principle (MEP), which has been popular in the modeling of droplet size and velocity distribution in sprays, is, strictly speaking, only applicable for isolated systems in thermodynamic equilibrium; whereas the spray formation processes are irreversible and nonisolated with interaction between the atomizing liquid and its surrounding gas medium. Consequently, the MEP-based distributions show various degrees of discrepancies when compared with various experimental data. In this study, a new model for the droplet size distribution has been developed based on the thermodynamically consistent concept—the maximization of entropy generation during the liquid atomization process. The model prediction compares favorably with the experimentally measured size distribution for droplets produced by an air-blast annular nozzle and near the liquid bulk breakup region. Therefore, the present model can be used to predict the initial droplet size distribution in sprays.


Articles with similar content:

THREE-DIMENSIONAL SIMULATION OF EFFERVESCENT ATOMIZATION SPRAY
Atomization and Sprays, Vol.19, 2009, issue 1
Jianzhong Lin, Ze-Fei Zhu, Hong-Bing Xiong
EXPERIMENTAL STUDY ON THE MERGED ANGLE BY SPRAY INTERACTION FROM PRESSURE-SWIRL ATOMIZERS
Atomization and Sprays, Vol.23, 2013, issue 4
Moongeun Hong, Soo Yong Lee, Youngsun Yi
Characterization of Sprays Produced by Low Frequency Ultrasonic Atomizers
International Journal of Fluid Mechanics Research, Vol.24, 1997, issue 4-6
Daniel Sindayihebura, Jean Cousin, Christophe Dumouchel
IMPACT WAVE-BASED MODEL OF IMPINGING JET ATOMIZATION
Atomization and Sprays, Vol.16, 2006, issue 7
Robert J. Santoro, Harry M. Ryan, III, William E. Anderson
PREDICTION OF SIZE AND VELOCITY DISTRIBUTIONS IN SPRAYS FORMED BY THE BREAKUP OF PLANAR LIQUID SHEETS USING MAXIMUM ENTROPY FORMALISM
Atomization and Sprays, Vol.21, 2011, issue 6
T. John Tharakan, Achintya Mukhopadhyay, Amitava Datta, Sujit Nath, Swarnendu Sen