ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.262 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2014011350
pages 47-80

ATOMIZATION MODELLING OF LIQUID JETS USING A TWO-SURFACE-DENSITY APPROACH

Bejoy Mandumpala Devassy
IFP Energies Nouvelles, let 4 Avenue de Bois-Preau, 92852 Rueil-Malmaison, France
Chawki Habchi
IFP Energies Nouvelles, let 4 Avenue de Bois-Preau, 92852 Rueil-Malmaison, France
Eric Daniel
Aix-Marseille Universite, IUSTI, 5 rue E. Fermi 13453 Marseille Cedex 13, France

要約

In internal combustion engines, the liquid fuel injection is an essential step for the air/fuel mixture preparation and the combustion process. Indeed, the structure of the liquid jet coming out from the injector plays a key role in the proper mixing of the fuel with the gas in the combustion chamber. The present work focuses on the liquid jet atomization phenomena under diesel engine conditions. Under these conditions, liquid jet morphology is assumed, including a separate liquid phase (i.e., a liquid core) and a dispersed liquid phase (i.e., a spray). This article describes the developmental stages of a new atomization model, for a high-speed liquid jet, based on an Eulerian-Eulerian two-fluid approach. The atomization phenomena are modelled by defining different surface density equations for the liquid core and the spray droplets. This new model has been coupled with a turbulent and highly compressible two-fluid system of equations. The process of ligament breakup and its subsequent breakup into droplets are handled by acquiring knowledge from the available high-fidelity experiments and numerical simulations. In the dense region of the liquid jet, the atomization is modelled as a dispersion process due to the stretching of the interface, from the liquid side in addition to the gas side. The model results have been compared to a recently published DNS results under typical direct injection diesel engine conditions. In particular, it has been shown that the interface instabilities and the turbulence in the leading tip of the liquid core play a major role in the primary atomization of diesel jets.


Articles with similar content:

MODELLING OF PRIMARY BREAKUP PROCESS OF A GASOLINE DIRECT ENGINE MULTI-HOLE SPRAY
Atomization and Sprays, Vol.23, 2013, issue 10
Giuseppe Cantore, Simone Malaguti, Luigi Allocca, Alessandro Montanaro, Stefano Fontanesi
DIRECT SIMULATIONS OF LIQUID SHEET BREAKUP IN PLANAR GAS BLAST ATOMIZATION
Atomization and Sprays, Vol.27, 2017, issue 2
Rajesh Reddy , Raja Banerjee
MICROSCOPIC ANALYSIS OF TRANSVERSAL AND AZIMUTHAL SURFACE DISTURBANCES OF HIGH-PRESSURE SPRAYS
Atomization and Sprays, Vol.27, 2017, issue 9
Valeri Kirsch, Reinhold Kneer, Johannes Palmer, Manuel Armin Reddemann
FORMATION AND DEVELOPMENT OF WALL LIQUID FILMS DURING IMPACTION OF GASOLINE FUEL SPRAYS
Atomization and Sprays, Vol.19, 2009, issue 8
Maria Spathopoulou, Manolis Gavaises, Hiromichi Yanagihara, Andreas P. Theodorakakos
HIGH-FIDELITY SIMULATION OF FUEL ATOMIZATION IN A REALISTIC SWIRLING FLOW INJECTOR
Atomization and Sprays, Vol.23, 2013, issue 11
Marios Soteriou, Xiaoyi Li