ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.262 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v7.i2.20
pages 123-142

HOLOGRAPHIC INVESTIGATION OF THE EFFECT OF ELEVATED AMBIENT TEMPERATURE ON THE ATOMIZATION CHARACTERISTICS OF IMPINGING JET SPRAYS

Y. Shen
Department of Mechanical Engineering, University of Illinois at Chicago, Chicago, IL 60607
C. Mitts
Department of Mechanical Engineering, University of Illinois at Chicago, Chicago, IL 60607
Dimos Poulikakos
Laboratory of Thermodynamics in Emerging Technologies, Institute of Energy Technology Mechanical and Process Engineering Department, ETH Zurich, Switzerland

要約

A study of impinging jet sprays formed by a pair of 0.8-mm jets impinging at an angle of 90 ° at ambient temperatures from 25 to 250 °C has been conducted using a double-pulse, two-reference-beam holographic technique. The working fluids utilized were water, a 59 wt% aqueous glycerol solution, and ethanol. Velocity measurements and drop size distributions were obtained for various regions of the spray, and the universal root-normal distribution was used as a representation of the cumulative volume distributions. Generally, the qualitative nature of the spray pattern remained the same as temperature increased, but the size of the resulting droplets decreased as a result of evaporation and increased instabilities. Furthermore, the wave structure, which is characteristic of a fully developed impinging jet spray, became less distinct as temperature increased. The average velocity of the particles within a 20 ° envelope of the spray centerline in the dense region was approximately equal to the mean jet velocity. At downstream locations, the average droplet velocity decreased to approximately 65% of the mean jet velocity. In addition to the data obtained, the advantages of using double-pulse holography are highlighted. Namely, spatial and temporal aspects of the entire spray can be obtained simultaneously. This is a powerful feature, especially in light of the ability of holography to be used to analyze dense regions of a spray.


Articles with similar content:

TEMPERATURE EFFECTS ON ATOMIZATION BY FLAT-FAN NOZZLES: IMPLICATIONS FOR DRIFT MANAGEMENT AND EVIDENCE FOR SURFACTANT CONCENTRATION GRADIENTS
Atomization and Sprays, Vol.8, 1998, issue 3
Andrew C. Chapple, Franklin R. Hall, Roger A. Downer, Rebecca S. Thompson
MODELING OF GROUP-HOLE-NOZZLE SPRAYS USING GRID-SIZE-, HOLE-LOCATION-, AND TIME-STEP-INDEPENDENT MODELS
Atomization and Sprays, Vol.19, 2009, issue 6
Rolf D. Reitz, Chang Sik Lee, Neerav Abani, Sung Wook Park, Hyun Kyu Suh
ATOMIZATION OF WATER BASED METALLIC PAINT BY MEANS OF ELECTROSTATION ROTARY ATOMIZERS
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
Gunther Schulte, T. Scholz, Klaus Bauckhage
MEASUREMENT OF BREAKUP LENGTH OF CYLINDRICAL LIQUID JETS. APPLICATION TO LOW-PRESSURE CAR INJECTOR
Atomization and Sprays, Vol.11, 2001, issue 3
Christophe Dumouchel
Fuel Droplet Dynamics and Dispersion of Practical Twin-Fluid Atomizer for Oil Furnace
International Journal of Fluid Mechanics Research, Vol.24, 1997, issue 1-3
Tsuyoshi Nakajima, Yuji Ikeda, N. Kawahara, Nobutaka Tsuchimoto