年間 12 号発行
ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684
Indexed in
VISUALIZATION OF INTERNAL FLOW IN A CAVITATING SLOT ORIFICE
要約
Cavitation in atomizing orifices remains a consistent design problem in many modern engineering applications, and few analytical or numerical tools exist for its prediction. Visualization of cavitation in slot orifices at pressures up to 5 atm is reported. Slots with a minimum dimension ranging from 0.127 to 1.525 mm are studied. The incipient and desinent cavitation pressures are found for a variety of slot sizes. The extent of cavitation within the orifice as a function of cavitation number is also established for these slots. The liquid-vapor interface varies dramatically with slot geometry and local surface conditions at the inlet corner.
Cavitation in certain sized orifices is observed to experience a complex, and apparently cyclical, growth and disintegration process. This leads to the conclusion that the constant contraction coefficient assumed by previous works is in error. The growth cycle is examined and discussed for one such slot geometry.
-
SOU Akira, TOMIYAMA Akio, HOSOKAWA Shigeo, NIGORIKAWA Shinji, MAEDA Tatsutoshi, Cavitation in a Two-Dimensional Nozzle and Liquid Jet Atomization (LDV Measurement of Liquid Velocity in a Nozzle), JSME International Journal Series B, 49, 4, 2006. Crossref
-
SOU Akira, Maulana Muhammad Ilham, HOSOKAWA Shigeo, TOMIYAMA Akio, Effects of the Cavitation and Reynolds Numbers on Cavitating Flow in a Two-Dimensional Nozzle, Progress in Multiphase Flow Research, 1, 2006. Crossref
-
Perpar Matjaž, Polutnik Erazem, Pečar Marko, Žun Iztok, Bubbly structures in a cavitating slot orifice, Experimental Thermal and Fluid Science, 53, 2014. Crossref
-
Lockett R.D., Liverani L., Thaker D., Jeshani M., Tait N.P., The characterisation of diesel nozzle flow using high speed imaging of elastic light scattering, Fuel, 106, 2013. Crossref
-
Sher Eran, Bar-Kohany Tali, Rashkovan Alexander, Flash-boiling atomization, Progress in Energy and Combustion Science, 34, 4, 2008. Crossref
-
Ramamurthi K., Nandakumar K., Patnaik R. K., Characteristics of Sprays Formed by Impingement of a Pair of Liquid Jets, Journal of Propulsion and Power, 20, 1, 2004. Crossref
-
Ghorbani Morteza, Yildiz Mehmet, Gozuacik Devrim, Kosar Ali, Cavitating nozzle flows in micro- and minichannels under the effect of turbulence, Journal of Mechanical Science and Technology, 30, 6, 2016. Crossref
-
Collicott Steven, Yeh Che-Ping, Tseng Kuo-Tung, Manipulating Inlet Cavitation to Control Spray Properties, 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2003. Crossref
-
Yang Shangze, Li Xuesong, Hung David L.S., Xu Min, Characteristics and correlation of nozzle internal flow and jet breakup under flash boiling conditions, International Journal of Heat and Mass Transfer, 127, 2018. Crossref
-
Yang Shangze, Ma Zhen, Li Xuesong, Hung David L.S., Xu Min, A review on the experimental non-intrusive investigation of fuel injector phase changing flow, Fuel, 259, 2020. Crossref
-
Collicott Steven H., Li Haiyun, True-scale True-pressure Internal Flow Visualization for Diesel Injectors, SAE Technical Paper Series, 1, 2006. Crossref
-
Luo Tianpei, Xia Jun, Lattice Boltzmann simulation of low-Reynolds-number cavitating contracting-nozzle flow interacting with a moving valve, AIP Advances, 10, 12, 2020. Crossref
-
Sou Akira, Hosokawa Shigeo, Tomiyama Akio, Effects of cavitation in a nozzle on liquid jet atomization, International Journal of Heat and Mass Transfer, 50, 17-18, 2007. Crossref
-
Wang Shangning, Yang Shangze, Qiu Shuyi, Li Xuesong, Hung David L.S., Xu Min, Mechanism of flash boiling bubble breakup based on rim-like structure, Fuel, 329, 2022. Crossref