ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.737 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 30, 2020 巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2015011185
pages 687-712

SEMI-EMPIRICAL MODEL FOR THE UNSTEADY SHEAR BREAKUP OF LIQUID JETS IN CROSS-FLOW

Georg Eckel
German Aerospace Center (DLR), Institute of Combustion Technology, Pfaffenwaldring 38-40, 70569 Stuttgart, Germany
Michael Rachner
German Aerospace Center (DLR), Institute of Combustion Technology, Pfaffenwaldring 38-40, 70569 Stuttgart, Germany
Patrick Le Clercq
German Aerospace Center (DLR), Institute of Combustion Technology, Pfaffenwaldring 38-40, 70569 Stuttgart, Germany
Manfred Aigner
German Aerospace Center (DLR), Institute of Combustion Technology, Pfaffenwaldring 38-40, 70569 Stuttgart, Germany

要約

The accuracy of spray simulations depends strongly on the initial and boundary conditions imposed on both the gaseous and the liquid phase. In many applications the droplet size distribution and droplet velocities close to the atomizer cannot be determined. In this study, a semi-empirical primary atomization model for Lagrangian particle tracking of the dispersed phase in Euler-Lagrange simulations is proposed. The examined atomization concept of a liquid jet in cross-flow subjected to a high velocity air stream is a configuration typical of industrial gas turbine applications. The model provides initial and boundary conditions not only via correlations for global parameters like characteristic diameters, it also delivers the sizes, starting positions and velocities of the droplets. This leads to an improved approximation of the droplet formation, droplet size distribution, and droplet propagation encountered in real sprays, which is here assessed by comparing simulation results with measurements.


Articles with similar content:

MODELING OF TURBULENT ATOMIZATION COMBINING A TWO-FLUID AND A STRUCTURE FUNCTION APPROACH
Atomization and Sprays, Vol.16, 2006, issue 1
Elke Deux, Martin Sommerfeld
ON THE DISINTEGRATION OF FAN-SHAPED LIQUID SHEETS
Atomization and Sprays, Vol.22, 2012, issue 9
Juan Carlos Ramos, Alejandro Rivas, R. Anton, Mireia Altimira
A LARGE-EDDY SIMULATION STUDY OF SUB-GRID TWO-PHASE INTERACTION IN PARTICLE-LADEN FLOWS AND DIESEL ENGINE SPRAYS
Atomization and Sprays, Vol.20, 2010, issue 8
Nidheesh Bharadwaj, Christopher J. Rutland
EQUILIBRIUM EVAPORATION SPRAY MODELING FOR APPLICATION IN COOL FLAMES
International Journal of Energy for a Clean Environment, Vol.6, 2005, issue 4
M. A. Founti, D. I. Kolaitis
DEVELOPMENT OF AN IMPROVED SPRAY/WALL INTERACTION MODEL FOR DIESEL-LIKE SPRAY IMPINGEMENT SIMULATIONS
Atomization and Sprays, Vol.25, 2015, issue 7
Rolf D. Reitz, Qi Jiao, Peng Deng, Zhiyu Han