ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.262 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v20.i1.20
pages 19-30

INTRODUCTION TO RINGLIKE STRUCTURES OBSERVED IN HIGH-PRESSURE DIESEL INJECTION INTO LIQUID BATH: PRELIMINARY INVESTIGATION

Miroslaw Weclas
Department of Mechanical Engineering, University of Applied Sciences, Institute of Vehicle Technology, D-90489 Nuernberg
Jochen Cypris
Faculty of Mechanical Engineering, Institute of Vehicle Technology (IFZN), Georg Simon Ohm University of Applied Sciences Nuremberg, Nurnberg

要約

The existence of ringlike structures associated with diesel injection into liquid is clearly indicated in the article. This phenomenon has been found to be typical under injection conditions involving small amounts of injected fuel for all investigated diesel nozzles injecting liquid into liquid. An initial model of surface instability in the liquid leaving the nozzle is proposed as an explanation of the phenomenon. There are four characteristic phases selected to describe the process: phase 1 corresponds to formation of a jet or surface jet just after leaving the nozzle (no ring yet exists); in phase 2, a ringlike structure is formed at a given distance from the nozzle outlet; in phase 3, the ring structure strongly decelerates while moderately growing in size; phase 4 is characterized by a very stable slow motion of the ring. There are a number of additional features of the ringlike structures pointed out in the article. One very unusual behavior of the ring is its ability for off-axis motion. This process is random and is characterized by extreme deviation of the ring-propagation direction from the initial jet direction defined by the nozzle geometry. It is suggested in the article that the rings consist of individual gas bubbles, probably of a cavitational nature. As a consequence, it is assumed that the ringlike structures are related to the cavitation that is initiated inside the nozzle. Typical of the ring structures are their very long lifetime and stability. However, there are also observations made of rings quickly disappearing just after their generation.


Articles with similar content:

Expression and Activity of Aryl Hydrocarbon Receptors in Development and Cancer
Critical Reviews™ in Eukaryotic Gene Expression, Vol.18, 2008, issue 4
Loretta L. Collins, Ellen C. Henry, Thomas A. Gasiewicz
IN-NOZZLE CAVITATION AND DISCHARGED LIQUID JET DURING TRANSIENT INJECTION PROCESS
Atomization and Sprays, Vol.29, 2019, issue 2
Akira Sou, Yoshitaka Wada, Hideaki Yokohata, Rubby Prasetya, Seoksu Moon, Raditya Hendra Pratama
EXPERIMENTAL INVESTIGATION OF THE DROP SIZE DISTRIBUTION OF SPRAYS PRODUCED BY A LOWVELOCITY NEWTONIAN CYLINDRICAL LIQUID JET
Atomization and Sprays, Vol.11, 2001, issue 3
Helene Malot, Christophe Dumouchel
X-RAY PHASE CONTRAST IMAGING OF CAVITATION AND DISCHARGED LIQUID JET IN NOZZLES WITH VARIOUS SIZES
Atomization and Sprays, Vol.29, 2019, issue 1
Akira Sou, Yoshitaka Wada, Hideaki Yokohata, Rubby Prasetya, Seoksu Moon, Raditya Hendra Pratama
INVESTIGATION OF GAS-DISSOLVING EFFECT ON THE SPRAY-FORMATION OF A STEADY-JET
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
Siichi Shiga, Zhen Huang, Hisao Nakamura, Y.M. Shao, S. Makita, Takao Karasawa