ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.737 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 30, 2020 巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2013008918
pages 273-280

PREDICTION OF PRESSURE DROP THROUGH BAFFLE INJECTOR

Kyubok Ahn
School of Mechanical Engineering, Chungbuk National University, Chungbuk, Korea
Hwan-Seok Choi
Combustion Chamber Department, Korea Aerospace Research Institute, Daejeon, Korea

要約

The baffle injector in a liquid rocket engine has two special objectives. One is to atomize effectively propellants and the other is to prevent combustion instabilities. A novel analytical method predicting a fuel-side pressure drop through a baffle injector has been suggested. In order to prove the accuracy of the proposed analytical method, three baffle injector models with different hole diameters and cooling channels were manufactured. At the same pressure drop, cold-flow tests using tap water have been carried out for measuring mass flow rates and calculating discharge coefficients. The discharge coefficients measured by the cold-flow tests have been compared with those calculated by the proposed analytical method. It is found that the analytical method can estimate the discharge coefficients within 1% error.


Articles with similar content:

A STUDY ON DISCHARGE COEFFICIENTS OF CLOSED-TYPE SWIRL INJECTORS FOR A LIQUID ROCKET ENGINE
Atomization and Sprays, Vol.27, 2017, issue 7
Kyubok Ahn, Hwan-Seok Choi
FLOW CHARACTERISTICS OF CLOSE-TYPE SWIRL INJECTORS MANUFACTURED BY A 3D PRINTER
Atomization and Sprays, Vol.27, 2017, issue 2
Wonjae Yoon , Kyubok Ahn
EXPERIMENTAL AND COMPUTATIONAL STUDY OF THE INFLUENCE OF PARTIAL NEEDLE LIFT ON NOZZLE FLOWIN DIESEL FUEL INJECTORS
Atomization and Sprays, Vol.22, 2012, issue 8
Jaime Gimeno, Raul Payri, Alejandro H. Plazas, O. Venegas
TWO PARAMETRIC FLOW MEASUREMENT IN GAS-LIQUID TWO-PHASE FLOW
International Heat Transfer Conference 7, Vol.10, 1982, issue
Xu Yinlong , Chen Zhihang, Chen Zuyao, Zhao Zaisan
Precision Setup for Fluid Pump Efficiency Testing
Heat Transfer Research, Vol.28, 1997, issue 7-8
Yu. D. Zozulyak, Yu. L. Levashov, V. T. Novatsky