ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.262 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v4.i3.30
pages 275-290

DISCHARGE COEFFICIENTS FOR PLAIN-ORIFICE EFFERVESCENT ATOMIZERS

S. Kevin Chen
Thermal Sciences and Propulsion Center, School of Mechanical Engineering, Purdue University, West Lafayette, Indiana 47907, USA
Arthur H. Lefebvre
Emeritus Professor, Cranfield University, Stratford, U.K., and Purdue University, W. Lafayette, IN, USA

要約

Discharge coefficients for plain-orifice effervescent atomizers are measured over wide ranges of air/liquid ratio, ambient air pressure, air injection pressure, and liquid properties. Three different discharge orifice diameters of 1.2, 1.6, and 2.0 mm are employed in conjunction with a constant mixing chamber diameter of 6.4 mm. The results obtained show that discharge coefficients are governed primarily by air/liquid mass ratio and air/liquid density ratio, with liquid properties playing only a minor role. It is also found that continuous increase in air/liquid mass ratio leads eventually to flow instabilities and a pulsating spray. The range of air/liquid ratios over which the spray remains stable can be extended by increases in flow velocity and/or air/liquid density ratio. An equation for estimating the maximum air/liquid mass ratio at which stable atomizer operation can be sustained is derived.


Articles with similar content:

EFFERVESCENT ATOMIZATION OF HIGH-VISCOSITY FLUIDS: PART I. NEWTONIAN LIQUIDS
Atomization and Sprays, Vol.1, 1991, issue 3
Paul E. Sojka, Harry N. Buckner
EFFERVESCENT ATOMIZATION OF POLYVINYLPYRROLIDONE SOLUTIONS: INFLUENCE OF LIQUID PROPERTIES AND ATOMIZER GEOMETRY ON LIQUID BREAKUP AND SPRAY CHARACTERISTICS
Atomization and Sprays, Vol.23, 2013, issue 1
Karl-Ernst Wirth, Astrid Gunther, Volker Gaukel, Heike P. Schuchmann, Jewe Schroder
EFFECT OF RECESS LENGTH ON THE SPRAY CHARACTERISTICS OF LIQUID-CENTERED SWIRL COAXIAL INJECTORS
Atomization and Sprays, Vol.26, 2016, issue 6
Peng Cheng, Qinglian Li, Zhongtao Kang, Xinqiao Zhang
Theoretical Determination of Spray Drop Size Distributions
Part 2: Applications

International Journal of Fluid Mechanics Research, Vol.24, 1997, issue 4-6
Jean Cousin, Christophe Dumouchel
INFLUENCE OF REACTOR PRESSURE ON TWIN-FLUID ATOMIZATION: BASIC INVESTIGATIONS ON BURNER DESIGN FOR HIGH-PRESSURE ENTRAINED FLOW GASIFIER
Atomization and Sprays, Vol.25, 2015, issue 12
T. Kolb, N. Djordjevic, A. Sanger, Tobias Jakobs, N. Zarzalis