International Journal of Energy for a Clean Environment
年間 8 号発行
ISSN 印刷: 2150-3621
ISSN オンライン: 2150-363X
SJR:
0.597
SNIP:
1.456
CiteScore™::
3.7
H-Index:
18
Indexed in
THE IMPORTANCE OF CONSIDERING BUILDING DOWNWASH WHEN ASSESSING THE NEED TO HEIGHTEN STACKS OF EXISTING SMALL-AND MEDIUM-SIZED INDUSTRIES
巻 8,
発行 1, 2007,
pp. 25-32
DOI: 10.1615/InterJEnerCleanEnv.v8.i1.20
要約
This communication intends to share the authors' experience on the modelling of atmospheric pollutant dispersion and the importance of building downwash considerations when assessing the need to increase the height of stacks of small and medium sized industrial facilities (SME's). In section 2 the existing Portuguese legislation on air quality and the stack height rules are briefly commented. Section 3 characterizes Portuguese industry in terms of ambient quality problems related to stack height. In section 4 the authors' experience in the study of stack height is presented. Finally, the need for an increased awareness on the pollutant dispersion problem is discussed.
445 記事の閲覧数
31 記事のダウンロード
記事の統計
類似内容の記事:
最新号
近刊の記事
APPLICATION OF MICROBIAL FUEL CELL FOR CASSAVA FERMENTATION WASTEWATER TREATMENT
Experimental and regression analysis of C. I engine powered by diesel surrogate fuel from waste lubricating oil using microwave pyrolysis
PREFACE
Thermal analysis and Improvement of Municipal Solid Waste Syngas Combustion applied on Micro Gas Turbine
Numerical simulation of turbulent flow in a heat exchanger equipped with fins of different materials and geometries
Low-Cost Photovoltaic Emulator With a High-Dynamic Response for Small Satellite Applications
Collection efficiency analysis and structure optimization of fugitive fumes from aluminum electrolysis based on multi-field coupling
Transient Analysis of Liquid Hydrogen Transfer in Cryogenic Storage Tanks
Pure Ammonia Combustion in a Bidirectional Swirling Flow
CFD modeling of the combustion of Ukrainian coal and biomass in a flare boiler unit TPP-210a
An Experimental Study of the Cooling Efficiency on Curved Surfaces with Different Shaped Holes
Employing Granulated Bimetallic Nanocomposite of Ni/Cu@CuMOF Nanocomposite in Steam Reforming of Methanol Process for Hydrogen Production
INVESTIGATION THE PERFORMANCE OF AN EVACUATED TUBE SOLAR COLLECTOR FILLED WITH AL2O3/WATER NANOFLUID UNDER THE CLIMATE CONDITIONS OF AL-HILLA(IRAQ)
The effect of carbonization temperature on the properties of carbonaceous material obtained from ethylene-propylene-diene-monomer (EPDM) wastes
THE SOCIAL COST OF CARBON EVALUATION BASED ON CARBON CAPTURE AND STORAGE TECHNOLOGIES FOR POWER GENERATION PLANTS