ライブラリ登録: Guest
Catalysis in Green Chemistry and Engineering

年間 4 号発行

ISSN 印刷: 2572-9896

ISSN オンライン: 2572-990X

H-Index: 2

Indexed in

HYDROPROCESSING OF LIGHT CYCLE OIL AND GAS OIL BLENDS OVER SULFIDED Ni–Mo/SiO2–Al2O3 CATALYST IN MICROCHANNEL AND FIXED BED REACTORS

巻 1, 発行 2, 2018, pp. 139-147
DOI: 10.1615/.2018021098
Get accessGet access

要約

Hydroprocessing of light cycle oil (LCO) and gas oil blends is carried out in a microchannel and fixed bed reactor over a sulfided Ni–Mo(S)/SiO2–Al2O3 catalyst. GCxGC results show < 4 wt.% polynuclear aromatic hydrocarbon (PAH) yields in the case of blend A (25%LCO + 75% GO) and blend B (50% LCO + 50% GO) in a fixed bed reactor. IBP-250°C fraction (gasoline) was maximum in blend B products, inside both fixed bed and microchannel reactors, at 380 and 400°C, respectively. Cracking reactions occur at lower temperatures (340°C) in a fixed bed reactor; whereas, higher temperatures (380°C) are required in a microchannel reactor. Hydrotreated products meet the cetane index, 95% distillation boiling point, PAH, and density specifications of BS VI (EURO 6) norms.

によって引用された
  1. Singh Ravindra, Yadav Anil, Chopra A., Christopher J., Kapur G. S., Comparison of five different HPLC columns with different particle sizes, lengths and make for the optimization of seven polycyclic aromatic hydrocarbons (PAH) analysis, SN Applied Sciences, 1, 4, 2019. Crossref

Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集 価格及び購読のポリシー Begell House 連絡先 Language English 中文 Русский Português German French Spain