RT Journal Article ID 5260170b39d93c84 A1 Buckner, Harry N. A1 Sojka, Paul E. T1 EFFERVESCENT ATOMIZATION OF HIGH-VISCOSITY FLUIDS: PART I. NEWTONIAN LIQUIDS JF Atomization and Sprays JO AAS YR 1991 FD 1991-09-01 VO 1 IS 3 SP 239 OP 252 AB The performance of a new type of fuel-injection nozzle that is capable of producing fine sprays when atomizing high-viscosity Newtonian fluids allow air-liquid ratios is reported. The nozzle, termed an effervescent atomizer, is a form of twin-fluid injector that operates by forming a well-mixed two-phase flow within the nozzle body. Shadow photographs show that atomization is accomplished via rapid expansion of gas bubbles after they exit the nozzle. Particle size measurements demonstrate that mean droplet diameters of 25 μm can be obtained for fluids with viscosities ranging from 400 to 968 cP at an air-liquid ratio of 0.15. Particle size measurements also indicate that mean droplet diameter is a strong function of air-liquid ratio while being nearly independent of liquid viscosity, fluid supply pressure, and mixture mass flow rate over the range of conditions tested. PB Begell House LK https://www.dl.begellhouse.com/journals/6a7c7e10642258cc,090b4ed560d7603f,5260170b39d93c84.html