RT Journal Article ID 5bc3e03a2e53b1ec A1 Konstantinov, Dancho A1 Marsh, Richard A1 Bowen, Phil J. A1 Crayford, Andrew T1 EFFERVESCENT ATOMIZATION FOR INDUSTRIAL ENERGY−TECHNOLOGY REVIEW JF Atomization and Sprays JO AAS YR 2010 FD 2010-10-28 VO 20 IS 6 SP 525 OP 552 K1 effervescent atomization K1 fuel injection K1 alternative fuels K1 combustion K1 industrial energy K1 technology review AB Effervescent atomization technology is a process employing the creation of a two-phase flow between a liquid fuel and an aerating gas. This technology is receiving renewed interest in the industrial energy field due to its applicability to alternative fuels. This paper presents a review of the principal governing parameters controlling the atomization characteristics of effervescent systems. Previous research in this field has developed a number of systematic parameters relating to the operation of effervescent atomizers but none are universally applicable, i.e., a thorough first-principles-based understanding of effervescent atomization has not yet been achieved. This paper reviews initial operating conditions (gas-to-liquid ratio, pressure drop), fluid properties (liquid viscosity, liquid surface tension, fuel type, atomizing gas molecular weight, non-Newtonian fluids), and geometric constraints (atomizer geometry, exit orifice geometry). There is considerable agreement among researchers with regard to most of these parameters. By contrast, geometric constraints have not been satisfactorily optimized. Recommendations based on experimental work do exist for most geometric constraints. These could, however, almost certainly be further optimized. Also included in this work is a thorough review of the experimental correlations required to develop effervescent atomization systems, including resultant spray characteristics, injector internal flow, and bubble energy. PB Begell House LK https://www.dl.begellhouse.com/journals/6a7c7e10642258cc,356d0f1001164cd1,5bc3e03a2e53b1ec.html